Steve's Exclusive Sale! Save an Extra 40% Off. Sale Ends Sunday at Midnight PST. Price on page reflects this discount. Must mention or enter coupon code "SB40" to receive coupon price.
Available in 5 colors. Light, sheer fabric in a wide selection of soft colors. Sheer horizontal fabric vanes float between two sheer layers to soften the view outside. Several variations of vane positions for numerous combinations of privacy, view and light control - enabling you to invite in as much or as little light as you want into your home. The only sheer horizontal that allows you to partially raise the shading with the fabric vanes in the open view-through position.
Note: For width specification please know the following
Inside Mount: Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction. The headrail (including end caps) will measure 3/16” less than the total width ordered, while the fabric will measure 1 1/8” less than the total width ordered. Due to variations in fabric weave and other environmental conditions, the finished dimensions for both width and length may vary plus or minus 1/8” from your ordered measurements.
Outside Mount: Measure the exact area you wish to cover as the manufacturer will produce your shade to your exact measurements. Be sure to take the window trim into account. On the width, allow at least 1 ½” of overlap on each side. An overlap of 3” on each side is recommended. Due to variations in fabric weave and other environmental conditions, the finished dimensions for both width and length may vary plus or minus 1/8” from your ordered measurements.
Height: The shade will measure the exact height ordered when the vanes are in the open or ‘view through’ position. Because the vanes rotate when closing, the shading will become 3/8” longer in the closed position. If preferred, window shadings can be ordered at 3/8” less than the measured length. In this case, the bottom rail will be positioned 3/8” above the sill when the vanes are in the open position. Rotating the vane closed will cause the bottom rail to meet the sill, closing any space. Due to variations in fabric weave and other environmental conditions, the finished dimensions for both width and length may vary plus or minus 1/8” from your ordered measurements.
For Side-by-Side Application: Vane alignment will be guaranteed within ¼” if the shades are ordered at the same time, are the same color, style and length, the total width of all window openings does not exceed 112”, and side-by-side installation is indicated when the order is placed. Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction. The headrail (including end caps) will measure 1 3/16” less than the total width ordered and the fabric will measure 1 5/8” less than the total width ordered.
Continuous Cord Loop System
Cord Length (Cords are White)
|
Blind Height |
Cord Height |
|
12” – 36” |
24” |
|
36 1/8” – 48” |
36” |
|
48 1/8” – 72” |
48” |
|
72 1/8” – 96” |
60” |
|
96 1/8” – 120” |
72” |
|
120 1/8” – 122” |
84” |
Cord Loops will measure the length indicated
Above unless otherwise specified.
Cords can be up to 15’ in 1’ increments
· w/ Aluminum Headrail (Color-coordinated Rail)
Width:12” – 96”
Maximum Width for Side Mount: 42”
Height:12” – 96”
Headrail Measurements:3 ¼” x 2 ¾”
Mounting Requirements
Minimum Depth for Flush Mount:3 ¼”
Minimum Depth for Mounting:¾”
Minimum Depth for Side Mount:1 ¼”
Surface Area Required for Outside Mount:¾”
· w/ Cassette System Headrail (White Rail with color-coordinated fabric insert)
Width:12” – 114”
Maximum Width for Side Mount:42”
Height:12” – 122”
Headrail Measurements:3 1/8” x 2 7/8”
Mounting Requirements
Minimum Depth for Flush Mount:3 ½”
Minimum Depth for Mounting:¾”
Minimum Depth for Side Mount:1 ¼”
Surface Area Required for Outside Mount:¾”
· w/ Ultra-Sleek Headrail (White Aluminum Rail with a matching Fabric Insert)
Width: 12” – 84”
Maximum width for Side Mount:48”
Height:12” – 84”
Headrail Measurements:2 7/8” x 2 5/8”
This headrail is not available with motorization
Mounting Requirements
Minimum Depth for Flush Mount:2 ¾”
Minimum Depth for Mounting:1 1/8”
Minimum Depth for Side Mount:1 1/8”
Surface Area Required for Outside Mount:1”
Motorization
Width:12” – 114”
Height:12” – 122”