Steve's Exclusive Collection
| Save An Extra 40% Off | Sale Ends
Sunday
@ Midnight |
| Must Mention or Enter Coupon Code "SB40" to receive coupon price |
Gold and silver strings scattered throughout fabric. Available in two colors. Fabric opacity: Semi-Sheer.
Fabric Width: 96” (The maximum width of each shade is 2” less than Fabric Width)
Because woven woods are made from natural materials, colors may vary from the same collections, depending on what season the materials were obtained.
Warranty: All of Steve’s Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer’s control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer’s responsibility.
Natural Woven Shades are manufactured with the highest standards of quality. However, during shipment the fabric may shift slightly because of its woven construction. This may cause a slight shortening in the length of the shade or possibly in slightly uneven edges. This is very simple to fix by the following instructions:
Length: Some fabrics will stretch over time. If, after installation, the shade becomes slightly shorter than originally ordered, gently grasp the bottom of the shade and pull down carefully to stretch the shade.
Uneven Edges: Lightly tap the edges of the shade with a flat surface, such as a ruler, until the edges are even.
Note: For width specification please know the following
Inside Mount: Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction up to ½”.
Outside Mount: Measure the exact area you wish to cover as the manufacturer will produce your shade to your exact measurements. Be sure to take the window trim into account.
Standard Roman Shade Specifications (This is for standard Roman Style Shade only, please see specifications for special options, as they may different than the standard shade availability).
Width: 12” – 95”
Height: 24” – 120”
*A 6” valance is included as standard
*Returns will be supplied with all outside mount shades only
**This shade style is available with all available special options.
Headrail Dimensions
Width: 1 ½”
Height: ¾”
Mounting Requirements
Minimum Inside Mount: 3/4”
Minimum Flush Inside Mount: 2 ½”
Minimum Outside Mounting Surface: ¾”
Stacking Chart*
|
Blind Height |
To 36” |
To 48” |
To 60” |
To 72” |
To 84” |
To 96” |
To 108” |
To 120” |
|
Stacking Height |
7 ½” |
9” |
11” |
13” |
14” |
15” |
16” |
17” |
*Stacking Height will vary by material
Roman Shade Style with Continuous Cord Loop (Recommended for shades 72” x 84” and above)
Width: 12” – 95”
Height: 18” – 120”
*This special option is not available in conjunction with Dual Shade with self operating liner, Top Down Bottom Up or 2 on 1 Headrail.
Headrail Dimensions
Width: 2 ½”
Height: ¾”
Mounting Requirements
Minimum Inside Mount: 3/4”
Minimum Flush Inside Mount: 3 5/8”
Minimum Outside Mounting Surface: ¾”
Stacking Chart
|
Blind Height |
To 36” |
To 48” |
To 60” |
To 72” |
To 84” |
To 96” |
To 108” |
To 120” |
|
Stacking Height |
10 ½” |
12” |
14” |
16” |
17” |
18” |
19” |
20” |
*Stacking Height will vary by material
Roman Shade Style with Top Down/Bottom Up (Available with Roman Shade Style Only)
Width: 18” – 95”
Height: 24” – 72”
*This special feature is available in conjunction with 2-on-1 headrail feature, liners, and edge bandings only. Not available with Continuous Cord Loop.
Standard Waterfall Shade Style (This is for Waterfall Style Shade only, please see specifications for special options, as they may different than the standard shade availability).
Width: 12” – 95”
Height: 24” – 120”
*A 6” attached valance is included as standard
*This shade style is available with the Continuous Cord Loop option, liners
All mounting hardware included!
Brackets
Hems
Shade Styles
- Standard Roman Shade Style: Flat shade and waterfalls at the bottom.
- Waterfall Shade Style: The shade retains its soft folds even in the lowered position.
Continuous Cord Loop System: A pulley system where the cord retains the same length no matter what position the shade is in. It provides easier lifting for larger shades. We recommend that you choose this feature for shades over 72” x 84”. This feature is not available with self-operating liner, top down/bottom up or 2 on 1 headrail.
Top Down/Bottom Up: The shade raises from the bottom as a normal shade would, but the top also lowers on a floating rail. The right cord lowers the shade from the top and the left cord raises the shade from the bottom. These are standard control positions and cannot be reversed. This feature is available with the Standard Roman Shade Style only. This feature is not available with continuous cord loop.
Edge Banding Options
Liner Options
Multiple Shades on One Headrail: Two shades are mounted on to one headrail, but work independently of eachother. This feature is not available with the Waterfall Shade Style. It is only available with 2-on-1 headrail for shades with the top down/bottom up or top down only features.
Valance Options
- Standard Valance: 6” attached valance that is included with every shade style.