Steve's Exclusive Sale! Save an Extra 40% Off. Sale Ends Sunday at Midnight PST. Price on page reflects this discount. Must mention or enter coupon code "SB40" to receive coupon price. The sandblasted slat, which adds a wood texture, creates the look of real wood. Foamwood is resistant to fading under direct sunlight and the material will not chip, crack, or warp like real wood blinds can.
Material: Foamwood
Warranty: All of Steve’s Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer’s control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer’s responsibility.
Please Note: Blinds over 78” wide will not be covered by the manufacturer’s warranty unless they are made into multiple blinds on one headrail.
Note: For width specification please know the following
Inside Mount: Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction up to ½”.
Outside Mount: Measure the exact area you wish to cover as the manufacturer will produce your shade to your exact measurements. Be sure to take the window trim into account.
Standard Blind Specifications
Width: 8” – 96”
- The minimum width of 8” is for Outside Mount Only. Order cannot be placed for 8” Inside Mount or below.
- Any measurements below 12” Outside Mount will have Tilt Control in the Center of the blind Only.
- Any measurement between 12” Outside Mount and 18” Inside Mount must have controls on opposite sides.
- Widths that are 18” and above can have same side control.
Height: 12” – 108”
The bottom rail is rectangular.
Headrail Dimensions: 2”Height x 2 ¼”Depth
Supplied with Crown Royal Valance
Valance Maximum Width: 100”
Approximate Stacking Height )
|
Blind Height |
Stack Height |
|
To 24” |
5” |
|
To 36” |
6” |
|
To 48” |
7” |
|
To 60” |
8” |
|
To 72” |
9” |
|
To 84” |
10” |
|
To 96” |
11” |
Ladder Chart (after ½” Inside Mount Deduction
|
Blind Width |
# of Ladders |
|
Up to 19” |
2 |
|
19 1/8” – 30” |
3 |
|
30 1/8” – 41” |
4 |
|
41 1/8” – 52” |
5 |
|
52 1/8” – 63” |
6 |
|
63 1/8” – 72” |
7 |
Standard Shade with Fabric Tapes
Width: 14” Outside Mount – 96”
Height: 12” – 108”
Multiple Blinds on One Headrail
The Minimum Width: Double the minimum width of the type of blind you choose
Routeless Feature
Width: 8” Outside Mount – 96”
Anything width below 12” Outside Mount will be center tilt only
Height:12” – 108”
Motorization for Tilt Only
- Infrared (IR) Control
- Width: 18” – 72”
- Height: 12” – 108”
- Radio Frequency (RF) Control
- Width: 12” – 60”
- Height: 12” – 108”
This feature is not available with a 3-on-1 Headrail
All Mounting Hardware Included!
Supplied with Crown Royale Valance
Brackets
- Standard
- Extension Brackets: Projects the back of the shade up to 2 3/8” from the mounting surface. Requires a 2” Flat surface.
- Hold Down Brackets: Mounted on wall or door to support the bottom rail of the blind, preventing the blind from swaying. Recommended for doors or for blinds that you do not intend to raise or lower.
Tilting Mechanism Options
- Cord
- Wand: Color-coordinated vinyl wand is supplied in 24”, 36”, 48” and 60” lengths, depending on the height of the shade ordered. You can specify the wand height if you need to.
- Please Note: Same side controls are not available. Tilt control must be on one side, with lift cord on the opposite side.
Fabric Tape Options
- 1” Wide Standard Fabric: A solid tape color.
- 1 /2” Wide Standard Fabric: A solid tape color.
- 1 ½” Decorative Fabric: Decorative design appears on the front face of the tape only. Window side of tape has a solid color.
Multiple Blinds on One Headrail: Choose to have 2-on-1 Headrail or 3-on-1 Headrail. This feature has multiple blinds mounted onto one continuous headrail. It is recommended for large blinds. Blinds over 78” wide are not covered under the manufacturer’s warranty unless they are made into multiple shades on one headrail.
Routeless Feature: The lift cord does not pass through the center of the slats as a standard shade would, which eliminates the route hole through the slats, allowing for greater light control and privacy. The slats can be easily removed for cleaning as they slide in through cords. Routeless slats are not available with fabric tapes.
Tassel Options
- Standard: Wooden tassels are supplied as standard with orders.
- Pullits: An optional upgrade to add color and flair to your cording.
Motorization (Tilt Only)
· Infrared (IR) Control: Tilts slats opened and closed with a remote control. Operates shades up to 30 feet away and requires a ‘line of sight’ from the remote control to the Satellite Eye in the headrail. The motor and battery pack are integrated within the headrail. Battery operation is standard, but plug-in power supply is available.
· Radio Frequency (RF) Control: Tilts slats opened and closed with a remote control. Operates shades up to 100 feet away and does not require a ‘line of sight’ from the remote control to the satellite eye. You can control up to 5 blinds or 5 groups of blinds individually with the multi-channel capability. The motor and battery pack are integrated within the headrail. Battery operation is standard, but plug-in power supply is available. Additional optional accessories include a 24 hour timer and wireless wall switch.