Bali
| Save An Extra 38% Off | Sale Ends
Friday
@ Midnight |
| Must Mention or Enter Coupon Code "BA38" to receive coupon price |
Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.
UV Transmittance: <1%
UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior.
Shading Coefficient: .32 - .36
Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer.
Sound Absorption: .40 - .45
AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption.
R-Value (Single Pane): 1.6 – 1.9
The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product.
R-Value (Double Pane Est): 2.6 – 2.9
See above for Single Pane Description.
Fabric: Solitaire
Fabric Width: 96”
Privacy Level: Semi-Opaque: Light and Dark shapes may be seen, but details are not visible. Deep fabric colors provide moderate light control, while light colors filter and diffuse bright sunlight and provide low light control. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered.
Features: Neutral to the streetside
Cleaning Instructions: Bali cellular shades are very easy to keep clean and look great for years to come. Regular dusting with a feather duster is recommended. When required, fabric can be lightly vacuumed with a brush attachment. If they become soiled with topical dirt, Bali recommends that the shade be spot cleaned using a soft rag or sponge, a mild detergent and warm water. Extra care should be used when cleaning the room darkening fabric as the fabric could be permanently creased. Due to differences in ultrasonic cleaning operators, Bali does not recommend this method of cleaning. Do not use strong detergents or spot removers. Dry cleaning is not recommended and is not covered by the warranty.
Bali’s Limited Lifetime Warranty
What is Covered: The cellular shade product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that the product was properly installed in a residential home, the product was made or assembled exclusively from Bali materials and components, and Bali’s recommendations were followed with regard to limitations and specifications.
Who is Covered: This warranty extends only to the original purchaser of the product.
Obligations to the Consumer: The obligations of Bali are limited to the repair or replacement of parts or products found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
The Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by the warranty.
This warranty is exclusive and in lieu of all other written or verbal warranties or obligations and liabilities. No person is authorized to extend or alter this warranty.
Measurements:
· Inside Mount: Please provide us with the exact measurements of your window opening. The manufacturer will make the necessary deductions.
· Outside Mount: Please provide us with the exact measurements of the area you want to cover with your shade. The manufacturer will not make any allowances.
Stacking Height Chart
|
Height Of Shade |
Total Stack Height |
|
12 – 18” |
2 3/8” |
|
19” – 30” |
2 ¾” |
|
31” – 42” |
3 1/8” |
|
43” – 54” |
3 3/8” |
|
55” – 66” |
3 ¾” |
|
67” – 78” |
4” |
|
79” – 90” |
4 3/8” |
|
91” – 96” |
4 5/8” |
*Total stack height includes headrail and bottomrail.
Standard Blind Specifications (This is for a standard blind with no additional. If you are interested in additional features, please see specifications for those, as they may differ)
· Minimum Width: 9” outside mount, 9 3/8” inside mount
· Maximum Width:
o 96” individual shade
o 192” multiple shades
o 60” Side Mount
· Minimum Height: 9”
· Maximum Height: 144”
Minimum Depth Required for Inside Mount:
· Standard Mount: ¾”
· Flush with Casing: 1 7/8”
Headrail Dimensions: 11/16” x 1 9/16”
Cordless Specifications
· Minimum Width: 18” outside mount, 18 3/8” inside mount
· Maximum Width: 96”
· Minimum Height: 12”
· Maximum Height: 84”
· Cordless Two or More Shades on One Headrail
o Minimum Width for Individual Shade: 18” OM, 18 3/8” IM
o Maximum Finished Width of Individual Shade: 60”
o Maximum Finished Shade Width:
§ 2 on 1: 120”
§ 3 on 1: 144”
o Maximum Shade Height: 72”
Minimum Depth Required for Inside Mount
· Standard Mount: ¾”
· Flush With Casing: 2 1/8”
Headrail Dimensions: 1 7/16” x 2”
Continuous Cord Loop Specifications
· Minimum Width: 18” Outside Mount, 18 3/8” Inside Mount
· Maximum Width: 96”
· Minimum Height: 9”
· Maximum Height: 144”
Minimum Depth Required for Inside Mount
· Standard Mount: 1 ¼”
· Flush with Casing: 2”
Headrail Dimensions: 1 ¼” x 1 5/8”
Top Down Bottom Up Specifications
· Minimum Width: 9” Outside Mount, 9 3/8” Inside Mount
· Maximum Width: 76”, 192” for multiple shades on one headrail
· Minimum Height: 9”
· Maximum Height: 96”
· Not available with continuous cord loop system.
Cordless Top Down Bottom Up Specifications
· Minimum Width: 22”
· Maximum Width: 60” exact
· Minimum Height: 18”
· Maximum Height: 64”
· Maximum Area: 3,192 square inches
Top Down Only
· Minimum Width: 18 Outside Mount, 18 3/8” Inside Mount
· Maximum Width: 73”, 192” for multiple shades on one headrail
· Minimum Height: 12”
· Maximum Height: 96”
Multiple Blinds on One Headrail
· Minimum Width: 9” Outside Mount, 9 3/8” Inside Mount
· Minimum Width BUTD&SUSD: 12”
· Maximum Width: 96”
o This is per panel. The overall maximum size is 192”
· Minimum Height: 9”
· Maximum Height: 144”
· Maximum Height BUTD&SUSD: 96”
· Not Available with Cordless Top Down Bottom Up
· Spacing
o Standard & CCL Controls: ½”
o Cordless: 3/8”
All Necessary Mounting Hardware Included!
Brackets
· Standard: These are hidden snap-in brackets made from zinc-plated steel for easy installation.
· Hold Down Brackets: Locks in the bottomrail to prevent blinds from swaying. Perfect for doors and places with wind.
· Extension Brackets: Projects the back of the shade out to clear any obstructions, such as handles. Choose from short (extends headrail 2”), medium (extends headrail 2 5/8”), or long (extends headrail 3 ½”).
· Cord Cleats: Mounted to the window frame or wall to secure the cord to ensure safety. Perfect for homes with pets and children.
Control Options
· Standard Cord Lock: A standard pull cord.
· Continuous Cord Loop: A pulley system where the cord retains the same length no matter what position the shade is in.
· Cordless: Simply raise and lower the shade by pushing up and pulling down on the bottomrail.
Raise and Lower Options
· Standard Lift: The bottomrail raises and lowers.
· Top Down Bottom Up: The bottomrail raises and lowers like a standard shade. It also has a floating rail on the top in which the top can lower also. It is great for light control when privacy is needed.
· Cordless Top Down Bottom Up: Same as standard top down bottom up, but the rails are raised and lowered by hand. Make sure these are put on windows where you can comfortably raise and lower the shade with your hand and have easy access.
· Top Down Only: A floating top rail raises and lowers. The bottom of the shade does not operate.
Multiple Blinds on One Headrail: Two or Three individually operating shades are mounted onto one headrail. This is feature is great for privacy on large windows. This is not available with the top down bottom cordless feature. For Controls, with a continuous cord loop system, it can have either one or two controls, but the standard is two controls – one on each end, but a common lift cord can be used to operate both shades simultaneously. Continuous Cord loop cannot be used in the middle of the headrail.
Additional Options (Please call 1-800-684-0862 for pricing and details)
· Special shapes
· Angled Top/Angled Bottom
· Sun Up/Sun Down Shades
· Cutouts
· Bay Window Shades
· SkyTrack Shades (For skylights)