Measuring:
· Inside Mount: Measure precise width and height dimensions. Do not deduct for headrail clearance gaps. The manufacturer will make all necessary allowances.
· Outside Mount: Please provide us with the exact measurement of the area you want to cover. The manufacturer will not make any allowances for width or height. It is recommended that the blind overlap the window by 3” total to ensure proper light control and privacy.
Dimension Specifications*
· Minimum Blind Width: 5 ½” exact
o 5 ½” – 8 15/16” available with center tilt only
o With Cordless Option: 18” exact
· Maximum Blind Width: 120”
o With Cordless Option: 96”
o With Privacy: 142”
· Minimum Blind Height: 6”
o With Cordless Option: 12”
· Maximum Blind Height: 126”
o With Cordless Option: 84”
o With Privacy and Cordless: 72”
*If an additional feature, or combination of features is not listed with a different dimension, it is the same as standard.
· The Finished Blind width for inside mount is the ordered width minus 3/8”. There are no deductions for outside mount.
· For two or three blinds on one headrail
o Minimum Blind Width of Individual Blind - 9” exact
§ With Cordless Option: 18” exact
o Maximum Finished Blind Width of Individual Blind:142”
§ With Cordless Option: 60”
o Maximum Finished Total Blind Width: 192”
§ With Cordless 2-on-1: 120”
§ With Cordless 3-on-1:144”
o Minimum Finished Blind Height: 6”
§ With Cordless Option:12”
o Maximum Finished Blind Height: 126”
§ With Cordless Option: 72”
o Gap Between Blinds: ¼”
§ With Cordless Option: 3/8”
Minimum Depth Required for Flush Mount with Casing: 1 ¾”
Minimum Depth Required for Flush Mount with Casing Cordless Option:2 1/8”
Minimum Depth Required for Inside Mount: ¾”
Clearance for Cordless: 1”
Clearance is the distance from backside of slat stack to back of bracket. This allows the blind to be mounted above the window frame for outside mount without extension brackets. The control for the center panel on a 3 on 1 cordless blind will always be on the left.
Ladder Count: Find out how many strings will be going down your windows
|
Finished
Blind Width |
Number
Of Ladders |
Number
Of Lifts |
|
To 6 15/16” |
2 |
2 |
|
To 8 15/16” |
2 |
2 |
|
To 11 15/16” |
2 |
2 |
|
To 20 15/16” |
2 |
2 |
|
To 37” |
2 |
2 |
|
To 61” |
3 |
2 |
|
To 85” |
4 |
4 |
|
To 109” |
5 |
4 |
|
To 133” |
6 |
4 |
|
To 142” |
7 |
4 |
All Necessary Mounting Hardware Included!
Brackets
· Box Brackets: for top, back, and side mount blinds
· Extension Brackets: Projects the back of the shade out to avoid any obstructions. Choose from 1 ¾”, 2 ¾” or 4 ¾”. Available at no charge upon request.
· Spacer Block: Mount the shades on this block, and extends the shade out 3/8”
· Hold Down Brackets: Holds the bottomrail in place. Perfect for doors and areas with wind.
Control Options
· Standard Lift Cords: Use lift cords and tilt to control the blinds.
· Cordless: Raise and lower shade by pushing and pulling on the bottomrail. A tilt wand or cord is still necessary to tilt the slats. The internal belt-driven motor offers smooth, quiet operation. Provided with a dust cover to reduce build-up that could slow down internal workings, and an acrylic handle to keep the blinds clean.
Privacy Options
· Standard: Route holes for cording goes through the slats.
· Privacy Feature: The route holes for cording is hidden for additional privacy.
Multiple Blinds on One Headrail: Two or three individually operating blinds are mounted onto one continuous headrail. Perfect for privacy where there are large windows.
Additional Options: Please call 1-800-684-0862 for pricing and details
· Multi-Colored Striped Blinds
· Double Slatted Blinds
· Cut-Outs
· Bay/Corner Blinds