Bali
| Save An Extra 38% Off | Sale Ends
Sunday
@ Midnight |
| Must Mention or Enter Coupon Code "BA38" to receive coupon price |
Fabric Width: 63”
Overlap Available: Yes
Liner Available: No
Cordless Available: No
Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade.
Cleaning Instructions: These were developed for the fabric used in pleated shades.
· Remove the pleated shade from the window, open the shade and lay it out on a clean, flat surface, such as a table or countertop. If the shade is dusty, simply vacuum over it using an upholstery attachment. For cleaning fingerprints or soiled spots on pleated shades, Bali recommends using an aerosol spray foam upholstery or fabric cleaner. Spray the foam cleaner over the entire area to be cleaned. Immediately scrub the area with a clean damp sponge until the stains are removed. If necessary, the entire shade may be cleaned in this fashion. Be careful not to crush or wrinkle the fabric. Remove the excess water from the fabric by patting with a clean, dry towel. Hang the shade up when completely dry. Frequent cleaning may tend to remove the fullness and body of the pleated fabric. Due to the differences in ultrasonic cleaning operators, it is not recommended. Do not use strong detergents or spot removers. Dry cleaning is not recommended.
Bali’s Warranty
Type Of Warranty
· Limited Lifetime Warranty for Neat Pleat ® products.
· Three year warranty for Standard Pleat products.
What is Covered:
· Pleated shades are warranted against original defects in materials or workmanship for the time period specified provided that the product was properly installed in a residential home, the product was made or assembled exclusively from Bali materials and components, and Bali’s recommendation were followed with regard to limitations and specifications.
Who is Covered: This warranty extends only to you as the original purchaser.
Obligations to the Consumer: The obligation of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installations, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by this warranty.
This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty.
Measurements:
· Inside Mount: Please provide us with the exact measurements of your window. The manufacturer will make the necessary deductions to ensure a proper fit.
· Outside Mount: Please provide us with the exact measurements of the area you want to cover. The manufacturer will not make any allowances, however specialty applications may have allowances for outside mount.
Stack Height Chart
|
Blind Height |
Stack Height* |
|
To 12” |
2 1/8” |
|
To 24” |
2 ¼” |
|
To 36” |
2 3/8” |
|
To 48” |
2 ½” |
|
To 60” |
2 5/8” |
|
To 72” |
2 ¾” |
|
To 84” |
2 7/8” |
|
To 96” |
3” |
*Includes headrail and bottomrail
Neat Pleat Specifications
Standard:
· Minimum Width: 12 1/8” Outside Mount, 12 ½” Inside Mount
· Maximum Width: 120”
o Max. Side Mount Width: 60”
· Minimum Height: 6”
· Maximum Height: 96”
Minimum Depth for Inside Mount
· Flush Headrail Mount: 1 7/8”
· Minimum Inside Mount: ¾”
Cordless:
· Minimum Width: 18” Outside Mount, 18 3/8” Inside Mount
· Maximum Width: 96” (made with overlaps for sizes exceeding the fabric width; overlap not available in center of shade)
o With Multiple Shades on One Headrail Per Panel: 60”
o With Multiple Shades on One Headrail Overall: 120”
· Minimum Height: 12”
· Maximum Height: 84”
o With Multiple Shades on One Hearail: 72”
· Maximum Overall Size: 6400 square inches
Continuous Cord Loop:
· Minimum Width: 18” Outside Mount, 18 3/8” Inside Mount
· Maximum Width: 120” (made with overlaps for sizes exceeding the fabric width)
· Minimum Height: 9”
· Maximum Height: 96”
Minimum Depth for Inside Mount
· Flush Headrail Mount: 2”
· Minimum Inside Mount: 1 ¼”
Top Down Bottom Up Specifications
· Minimum Width: 12 1/8” Outside Mount, 12 ½” Inside Mount
· Maximum Width:
o Single Shade: 96”
§ Side Mount Single Shade: 60”
o With Multiple Blinds on One Headrail:
§ Standard Pleat:144”
§ Neat Pleat: 120”
§ Side Mount: 42”
· Minimum Height: 9”
· Maximum Height: 96”
All Necessary Mounting Hardware Included!
Brackets
· Standard: Zinc-plated spring steel hidden snap-in brackets for easy installation.
· Side Mount Brackets: Available when shades must be installed from the side of the casing or wall.
· Extension Brackets: Available upon request, extends the back of the shade out to avoid any obstructions, such as door handles. Available in 2”, 2 5/8”, 3 ½”.
· Hold-Down Brackets: Available upon request, lock the bottomrail down to avoid swaying.
Pleat Options
· Neat Pleat: A patented back ladder support is color-coordinated to the back of the fabric. It ensures uniform pleat spacing from top to bottom. Your pleats will not sag or flatten out, guaranteed for life.
Lift Options
· Standard: Standard lift cord
· Cordless: Raise and lower shades with the touch of your hand. Perfect for homes with children and pets because it is ideal for safety. Also, the elimination of the lift cord provide a more attractive appearance. It is operated by a long-lasting belt-driven motor for a smooth, quiet operation. Please make sure that this feature is only used on windows where you have easy access and can comfortably raise and lower the shade by hand.
· Continuous Cord Loop: A single, continuous white loop cord raises and lowers the shade, maintaining the same length no matter what position the shade is in. The slim headrail contains a powerful clutch that stops the shade precisely at any point and hold the bottomrail level. The clutch mechanism also helps lift the shades weight as it’s raised for easier lifting. Therefore, this feature is perfect for large windows. Shades wider than 70” have a headrail gearbox for easier lifting, but more pulls are required. The blind is stacked tighter than the conventional cord and is held more securely. The headrail is color-coordinated to the shade, and in some cases has a white front slat.
Additional Options – Please call 1-800-684-0862 for pricing and details
· Bay or Corner Windows
· Specialty Shades
· Overlay
· Sun Up/Sun Down Shades
· Skylights