Bali Sale! Save an Extra 35% Off. Sale Ends Sunday at Midnight PST. Price on page reflects this discount. Must mention or enter coupon code "BALI35" to receive coupon price.
Material Width: 96”
Please Note: Natural shades may have variations and visual inconsistencies in color, grain and texture. They may also crack or split, twist or bow, shrink or stretch, and change color over time due to aging, direct sunlight or other climatic conditions. These unique characteristics are inherent in natural materials and are not considered defects in material or workmanship. Exact color matches cannot be guaranteed.
Cleaning: Occasional light vacuuming with a brush attachment should keep shades clean.
Tips: During the shipping process, the natural shade material may have shifted slightly due to its woven construction, causing slight shortening of the shade’s length or uneven edges.
· Height: If after installation, the shade is slightly shorter than ordered, grasp the bottom of the shade and gently pull to stretch the shade to the preferred height. Some materials will also stretch by themselves over time.
· Uneven Edges: Lightly tap the shade’s edge with a flat edge (ex. A ruler) until even.
Bali’s Limited Lifetime Warranty
What is Covered: Bali woven wood blinds are warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that the product was properly installed in a residential dwelling, the product was made or assembled exclusively from Bali materials and components, and Bali’s recommendations were followed with regard to limitations and specifications.
Who is Covered: This warranty extends only to you as the original purchaser.
Obligations to the Consumer: The obligations of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning, or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these to be normal wear and tear and are not covered under this warranty.
This warranty is exclusive and in lieu of all other written or verbal warranties or obligations and liabilities. No person is authorized to extend or alter the warranty.
Measurements:
· Inside Mount: Please provide us with the exact measurements of your window opening. The manufacturer will make the necessary deductions.
· Outside Mount: Please provide us with the exact measurements of the area you want to cover. The manufacturer does not make any allowances to the width or height.
-Minimum Width:
· Standard Roman: 10” Outside Mount, 10 ½” Inside Mount
· Looped Roman: 12” Outside Mount, 12 ½” Inside Mount
· Top Down/Bottom Up: 14” Outside Mount, 14 ½” Inside Mount
· Continuous Cord Loop: 24” Outside Mount, 24 ½” Inside Mount
-Maximum Width:
· Standard Roman: 96” Single Shade, 144” Multiple Blinds on One Headrail
· Looped Roman: Due to weight limitations, for the Looped Roman Style, as the height gets larger, the maximum width for a single shade lowers, and must be produced as multiple shades on one headrail. See below:
Looped Roman Shade Style
|
Blind Height |
Max. Width for
Single Shade* |
|
10” – 72” |
96” |
|
To 84” |
84” |
|
To 96” |
72” |
|
To 108” |
60” |
|
To 120” |
48” |
|
*If width exceeds max. width, it must be produced as multiple shades on one headrail. |
-Minimum Height: 10”
-Maximum Height:
· Standard Cord Control: 120”
· Continuous Cord Loop: 108”
Minimum Depth Required for Inside Mount
· Standard & Ceiling Brackets: ¾”
· Extension Brackets: 1”
Stack Height: Measured from the top of the headrail to the lowest point of the shade when the shade is completely raised. Stack heights are approximate.
· Standard Control: 8 ¾” – 9 ¾”
· Continuous Cord Loop: 10” – 11”
All Mounting Hardware Included!
Brackets
· Standard: Steel L-Brackets
· Ceiling Mount: Available upon request at no charge, when shades cannot be mounted on the wall or molding.
· Extension: Projects the back of the shade out 1 ¾” from the mounting surface. Perfect for clearing obstructions, such as door handles.
· Hold Down: Available upon request at no additional charge, these secure the bottomrail to avoid swaying. Perfect for doors and areas with wind.
Roman Shade Style
· Standard Flat: The material lays flat when fully lowered for a continuous appearance.
· Looped: The material cascades down when fully lowered to create a more elegant appearance.
Valance Options
· 6” Standard Valance: Comes standard with every shade. It is a strip of the natural material, 6” in height, to conceal the headrail, hardware, and the stack of the shade when fully raised. Edge banding will be applied to the sides and bottom of the valance if the edge banding option is chosen for your order. Valance returns are standard on outside mount, and are not available with inside mount. No special valance return lengths or widths are available.
· 9” Standard Valance: Available for an additional charge. It is a strip of the natural material, 9” in height, to conceal the headrail, hardware, and the stack of the shade when fully raised. It is recommended for longer length shades to conceal the stack better. Edge banding will be applied to the sides and bottom of the valance if the edge banding option is chosen for your order. Valance returns are standard on outside mount, and are not available with inside mount. No special valance return lengths or widths are available.
· Deco Trim Valance: Adds a decorative touch to your shade. Choose from multiple styles to fit best with your décor. Choose from “Seascape”, “Dentil”, “Cathedral”, and “Horizon” styles. If this type of valance is chosen, you must also select fringe type.
· Traditional Wood Valance: A 3 ½” decorative wood valance that looks like crown molding. Returns are available ½” – 4 1/8” for inside mount shades. Valance returns are standard on outside mount. Shades ordered as Outside Mount will be supplied with returns sized to cover the end of the shade back to the mounting surface. If extension brackets are requested when the shade is ordered, longer returns will be sent automatically. Outside mount valances are available without returns upon request. Not available with Continuous Cord Loop shades.
· Separate Valances: A separate valance can be ordered for use alone or to complement other window treatments. Available in all valance types. Valances over maximum material width will be spliced. The valance material comes attached to a headrail and includes mounting brackets. Also available with edge banding on them.
Edge Banding: Not available with this collection
Fringe: Adds a decorative touch to the shade. Must be chosen with a Deco-trim style.
Hem Options
· Straight Hem: Standard straight bottom
· Deco-Trim Hem: These hem designs coordinate with the deco-trim valance designs. They are cut into the hem of the shade to a depth of approximately 2 ½”, allowing light through the bottom of the shade. If complete privacy and light filtering is desired, add 2 ½” to the ordered height.
· Deco-Pocket Hem: Distinctive hem designs with decorative rod accents. The metal rods are 5/8” in diameter and have a classic ball finial, and are cut to the width of the shade. The hem is also available without accent rods to add your own decorative hardware. The designs are cut into the hem of the shade to a depth of approximately 4 ½”, allowing light through the bottom of the shade. If complete privacy and light filtering is desired, please add 4 ½” to the ordered height.
Liner Options: Privacy Liner and Blackout Liner is available for additional privacy and light control. The liners are an 80/20 poly/cotton blend and are available up to 96” wide. Choose from colors Buff, Chestnut, Espresso, or Soft White in the privacy liner, and all but Soft White in the blackout liner. Below are liner color coordination suggestions:
|
Color Name |
Color Number |
Suggested
Privacy Liner** |
Suggested
Blackout Liner** |
|
Butternut |
33307 |
Buff – 0093 |
Buff - 5093 |
|
Merlot |
33548 |
Chestnut – 0297 |
Chestnut - 5297 |
|
Whitewash |
33429 |
Soft White - 0417 |
Buff - 5093 |
*The Privacy Liner is colored front and back – please order soft white if a neutral color is desired facing the street. All colors of the blackout liner are white facing the street.
Additional Options (please call 1-800-684-0862 for pricing and details):
· Angle Top Shades
· Cut-Outs
· Mitered Corner Shades for bay or corner windows