Bali
| Save An Extra 38% Off | Sale Ends
Sunday
@ Midnight |
| Must Mention or Enter Coupon Code "BA38" to receive coupon price |
Fabric Content: 100% Polyester
Cleaning Instructions: Fabric is steam pressed in the manufacturing process, but may need to be re-steamed or ironed at low temperature before hanging. Do not steam or iron fabric while it is on the vanes as they will be damaged. Fabric may be feather dusted or vacuumed at a low suction setting to remove dust. Fabric is machine washable. Use the gentle cycle, warm water and mild laundry detergent. Do not use chlorine bleach. Line dry. Use a low iron if necessary before putting fabric back on vanes.
Bali’s Three Years Warranty
What is Covered: The vanes (vinyl) for any Sheer Enchantment product are warranted against original defects in materials or workmanship for three years provided that:
- The product was properly installed in a residential dwelling
- The product was made or assembled exclusively from Bali materials and components
- Bali’s recommendations were followed with regard to limitations and specifications
Who is Covered: This warranty extends only to the original purchaser.
Obligations to the Consumer: The limitations of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the blind down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by this warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by this warranty.
*This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty.
Springs shall have no liability whatsoever for incidental or consequential damages
Measuring:
· Inside Mount: Please provide us with your exact measurements of the window opening. Do not make any deductions, as the manufacturer will make the necessary deductions. A fabric panel, approx. 2”, has been added to prevent light gap on each end of the blind when rotated open. This fabric panel will not stack tightly on each side of the vanes and is considered a natural characteristic of the blind. Outside mount is recommended for optimal appearcance and light control.
· Outside Mount: Please provide us with the exact measurements of that area you want to cover. The manufacturer does not make allowances/deductions to the width. It is recommended that 3” be added to the total width for optical light control and privacy.
· Uncovered Window: If you want the entire window uncovered when blinds are fully open, please scroll to the bottom of this page to view the charts.
Blind Specifications
· Min. Width: 17” Outside Mount, 17 ¼” Inside Mount
· Max. Width: 191”
· Min. Height: 19”
· Max. Height: 104”
Mounting Requirements:
· Min. Depth for IM: 3 ¾”
· Flush Mount Headrail:4”
· Flush Mount Vanes: 4 ¾”
· Flush Mount Curved Wood Valance: 5 3/16”
· Flush Mount Classic Wood Valance: 4 11/16”
· Flush Mount 5 ½” Regal Cornice: 5 5/8”
· Flush Mount 7 ½” Regal Cornice: 6 ¼”
· Flush Mount 5 ½” Noble Cornice: 5 ¼”
· Flush Mount 7 ½” Noble Cornice: 5 9/16”
Number of Headrail Mounting Brackets:
|
Blind Width |
To 54” |
To 81” |
To 108” |
To 135” |
To 162” |
To 191” |
|
# of Brackets |
2 |
3 |
4 |
5 |
6 |
7 |
Wood Valance and Cornice Specifications
Size Limits:
· Min.Width:17” Outside Mount, 17 ¼” Inside Mount
· Max Width: 191”
Valances and Cornices wider than the sizes shows in the chart below will be manufactured in two or three sections. Each section will be shipped in a separate box. The sections must be spliced together during installation.
|
Valance Type |
Inside Mount |
Outside Mount |
|
Curved Valance |
94” |
93 1/8” |
|
Classic Valance |
94” |
94 3/16” |
|
5 ½” Regal Cornice |
94” |
92 3/16” |
|
7 ½” Regal Cornice |
94” |
91 1/16” |
|
5 ½” Noble Cornice |
94” |
93 1/8” |
|
7 ½” Noble Cornice |
94” |
92 7/16” |
Return Information
|
Valance Type |
Standard
Return Length |
Full Recess
Depth |
|
Curved Valance |
5” |
5 15/16” |
|
Classic Valance |
5” |
5 7/16” |
|
5 ½” Regal Cornice |
5” |
6 7/16” |
|
7 ½” Regal Cornice |
5” |
7” |
|
5 ½” Noble Cornice |
5” |
5 15/16” |
|
7 ½” Noble Cornice |
5” |
6 5/16” |
*Custom returns available upon request
Uncovered Windows
How to Measure:
- Determine the clear opening width for one-way draw or split draw. This is generally the width of the window. It is recommended that an additional 3” be added to the width to control light control and privacy. The additional 3” is to be added to this if ordering one-way draw.
- Match the clear opening width with dimension found under “C.O (Clear Opening) column. For even spacing, round up width measurement to the next size in the stack chart.
- Order the corresponding dimension found in the “F.B.W” (Finished Blind Width) column. Be sure that your opening allows that width.
Example: Split Draw, Outside Mount - If determined width for clear opening window view is 64 ¼”, order width needed to provide full unobstructed view is 80”
Clear Opening Chart – Outside Mount
|
# of Vanes |
One-Way |
Split Draw |
# of Vanes |
One-Way |
Split Draw |
|
CO |
FBW |
CO |
FBW |
CO |
FBW |
CO |
FBW |
|
6 |
14 7/8” |
19 5/8” |
11 1/8” |
17” |
36 |
94 ½” |
114” |
90 ¾” |
111 3/8” |
|
7 |
17 ½ |
22 ¾ |
|
|
37 |
97 1/8 |
117 1/8 |
|
|
|
8 |
20 1/8 |
25 7/8 |
16 3/8 |
23 ¼ |
38 |
99 ¾ |
120 3/8 |
96 1/8 |
117 ¾ |
|
9 |
22 ¾ |
29 |
|
|
39 |
102 3/8 |
123 ½ |
|
|
|
10 |
25 3/8 |
32 1/8 |
21 ¾ |
29 5/8 |
40 |
105 1/8 |
126 5/8 |
101 3/8 |
124 |
|
11 |
28 1/8 |
35 3/8 |
|
|
41 |
107 ¾ |
129 ¾ |
|
|
|
12 |
30 ¾ |
38 ½ |
27 |
35 7/8 |
42 |
110 3/8 |
132 7/8 |
106 5/8 |
130 ¼ |
|
13 |
33 3/8 |
41 5/8 |
|
|
43 |
113 |
136 |
|
|
|
14 |
36 1/8 |
44 ¾ |
32 3/8 |
42 1/8 |
44 |
115 ¾ |
139 ¼ |
112 |
136 5/8 |
|
15 |
38 ¾ |
47 7/8 |
|
|
45 |
118 3/8 |
142 3/8 |
|
|
|
16 |
41 3/8 |
51 |
37 ¾ |
48 ½ |
46 |
121 |
145 ½ |
117 3/8 |
142 7/8 |
|
17 |
44 |
54 ¼ |
|
|
47 |
123 5/8 |
148 5/8 |
|
|
|
18 |
46 5/8 |
57 3/8 |
43 |
54 ¾ |
48 |
126 3/8 |
151 ¾ |
122 ¾ |
149 ¼ |
|
19 |
49 3/8 |
60 ½ |
|
|
49 |
129 |
155 |
|
|
|
20 |
52 |
63 5/8 |
48 ¼ |
61 |
50 |
131 5/8 |
158 1/8 |
128 |
155 ½ |
|
21 |
54 5/8 |
66 ¾ |
|
|
51 |
134 ¼ |
161 ¼ |
|
|
|
22 |
57 3/8 |
70 |
53 5/8 |
67 3/8 |
52 |
137 |
164 3/8 |
133 ¼ |
161 ¾ |
|
23 |
60 |
73 1/8 |
|
|
53 |
139 5/8 |
167 ½ |
|
|
|
24 |
62 5/8 |
76 ¼ |
58 7/8 |
73 5/8 |
54 |
142 ¼ |
170 5/8 |
138 5/8 |
168 1/8 |
|
25 |
65 ¼ |
79 3/8 |
|
|
55 |
144 7/8 |
173 7/8 |
|
|
|
26 |
67 7/8 |
82 ½ |
64 ¼ |
80 |
56 |
147 5/8 |
177 |
143 7/8 |
174 3/8 |
|
27 |
70 5/8 |
85 ¾ |
|
|
57 |
150 ¼ |
180 1/8 |
|
|
|
28 |
73 ¼ |
88 7/8 |
69 ½ |
86 ¼ |
58 |
152 7/8 |
183 ¼ |
149 1/8 |
180 5/8 |
|
29 |
75 7/8 |
92 |
|
|
59 |
155 ½ |
186 3/8 |
|
|
|
30 |
78 5/8 |
95 1/8 |
74 7/8 |
92 ½ |
60 |
158 ¼ |
189 5/8 |
154 ½ |
187 |
|
31 |
81 ¼ |
98 ¼ |
|
|
61 |
159 1/8 |
191 |
|
|
|
32 |
83 7/8 |
101 3/8 |
80 ¼ |
98 7/8 |
62 |
|
|
157 5/8 |
191 |
|
33 |
86 ½ |
104 5/8 |
|
|
|
|
34 |
89 1/8 |
107 ¾ |
85 1/2 |
105 1/8 |
|
35 |
91 ¾ |
110 7/8 |
|
|
Clear Opening Chart – Inside Mount
|
# of Vanes |
One-Way |
Split Draw |
# of Vanes |
One-Way |
Split Draw |
|
CO |
FBW |
CO |
FBW |
CO |
FBW |
CO |
FBW |
|
7 |
10 5/8” |
19 ¼” |
|
|
36 |
88 ¼” |
111 1/8” |
86 |
108 3/8 |
|
8 |
13 ¼ |
22 3/8 |
11 1/8” |
19 ¾” |
37 |
90 7/8 |
114 ¼ |
|
|
|
9 |
15 7/8 |
25 ½ |
|
|
38 |
93 ½ |
117 3/8 |
91 3/8 |
114 ¾ |
|
10 |
18 ½ |
28 5/8 |
16 3/8 |
26 |
39 |
96 1/8 |
120 ½ |
|
|
|
11 |
21 ¼ |
31 7/8 |
|
|
40 |
98 ¾ |
123 5/8 |
96 5/8 |
121 |
|
12 |
24 |
35 |
21 ¾ |
32 3/8 |
41 |
101 ½ |
126 7/8 |
|
|
|
13 |
26 5/8 |
38 1/8 |
|
|
42 |
104 1/8 |
130 |
101 ½ |
127 ¼ |
|
14 |
29 ¼ |
41 ¼ |
27 |
38 5/8 |
43 |
106 7/8 |
133 1/8 |
|
|
|
15 |
31 7/8 |
44 3/8 |
|
|
44 |
109 ½ |
136 ¼ |
106 7/8 |
133 5/8 |
|
16 |
34 5/8 |
47 5/8 |
32 ¼ |
44 7/8 |
45 |
112 1/8 |
139 3/8 |
|
|
|
17 |
37 ¼ |
50 ¾ |
|
|
46 |
114 ¾ |
142 ½ |
112 1/8 |
139 7/8 |
|
18 |
39 7/8 |
53 7/8 |
37 ¾ |
51 ¼ |
47 |
117 ½ |
145 ¾ |
|
|
|
19 |
42 ½ |
57 |
|
|
48 |
120 1/8 |
148 7/8 |
117 ½ |
146 ¼ |
|
20 |
45 1/8 |
60 1/8 |
43 |
57 ½ |
49 |
122 ¾ |
152 |
|
|
|
21 |
47 ¾ |
63 ¼ |
|
|
50 |
125 3/8 |
155 1/8 |
122 ¾ |
152 ½ |
|
22 |
50 ½ |
66 ½ |
48 ¼ |
63 ¾ |
51 |
128 1/8 |
158 3/8 |
|
|
|
23 |
53 1/8 |
69 5/8 |
|
|
52 |
130 ¾ |
161 ½ |
128 |
158 ¾ |
|
24 |
55 7/8 |
72 7/8 |
53 5/8 |
70 1/8 |
53 |
133 ½ |
164 ¾ |
|
|
|
25 |
58 ½ |
76 |
|
|
54 |
136 1/8 |
167 7/8 |
133 3/8 |
165 1/8 |
|
26 |
61 1/8 |
79 1/8 |
59 |
76 ½ |
55 |
138 ¾ |
171 |
|
|
|
27 |
63 7/8 |
82 ¼ |
|
|
56 |
141 3/8 |
174 1/8 |
138 5/8 |
171 3/8 |
|
28 |
66 5/8 |
85 ½ |
64 ¼ |
82 ¾ |
57 |
144 |
177 ¼ |
|
|
|
29 |
69 ¼ |
88 5/8 |
|
|
58 |
146 7/8 |
180 ½ |
144 |
177 5/8 |
|
30 |
71 7/8 |
91 ¾ |
69 5/8 |
89 1/8 |
59 |
149 ½ |
183 5/8 |
|
|
|
31 |
74 ½ |
94 7/8 |
|
|
60 |
152 1/8 |
186 ¾ |
149 3/8 |
184 |
|
32 |
77 1/8 |
98 |
74 7/8 |
95 3/8 |
61 |
154 ¾ |
189 7/8 |
|
|
|
33 |
80 ¼ |
101 5/8 |
|
|
62 |
155 3/8 |
191 |
154 5/8 |
190 ¼ |
|
34 |
82 7/8 |
104 ¾ |
80 ¾ |
102 1/8 |
64 |
|
|
154 3/8 |
191 |
|
35 |
85 ½ |
107 7/8 |
|
|
|
|
|
|
|
All Mounting Hardware Included!
Valance Options:
· DauphineValance: Comes standard with all orders. Fabric is shirred for a soft look with snap-in brackets for easy installation. The threaded cap provides no-snag shirring of sheer fabric and is notched for returns.
· Curved Wood: Crafted from premium hardwood with a fine furniture quality finish. The valance has gently curved contours and is 4” in height. Adjustable, snap-in brackets are included for easy installation. Inside Mount valances are not provided with returns. This will be shipped separately from the blind but the manufacturer recommends installing the blind and valance at the same time.
· Classic Wood: Crafted from premium hardwood with a fine furniture quality finish. The valance is simple and 4” in height. Adjustable, snap-in brackets are included for easy installation. Inside Mount valances are not provided with returns. This will be shipped separately from the blind but the manufacturer recommends installing the blind and valance at the same time.
· Regal Wood Cornice: Crafted from premium hardwood with a fine furniture quality finish. This style crowns your vertical blinds and are available in either 5 ½” or 7 ½” heights. L-brackets are provided for easy installation. Inside mount has straight cut ends, and no returns or dustcover. Outside mount has mitered corners, returns, and a dustcover to conceal the top of the blind. Not available for bay windows. This will be shipped separately from your blind but the manufacturer recommends installing the blind and cornice at the same time.
· Noble Wood Cornice: Crafted from premium hardwood with a fine furniture quality finish. This has a stately style your vertical blinds and are available in either 5 ½” or 7 ½” heights. L-brackets are provided for easy installation. Inside mount has straight cut ends, and no returns or dustcover. Outside mount has mitered corners, returns, and a dustcover to conceal the top of the blind. Not available for bay windows. This will be shipped separately from your blind but the manufacturer recommends installing the blind and cornice at the same time.
Hem Styles:
· Rolled European Hem: Comes standard, with a minimal bottom hem.
· 4” Draper Hem: A 4” hem at the bottom of the fabric for a more tailored design.
Cut Yardage: Available by the yard for all fabrics. Must order 1 yard minimum, and fabric is 118” wide. Cut yardage may not be an exact match due to dye lot variations and may need to be ironed when received using a low temperature setting. Cut yardage is provided as is and there is no warranty regarding suitability in desired applications. This is not recommended for upholstery. Please call us at 1-800-684-0862 for pricing.
Additional Options: Please call 1-800-684-0862 for pricing and details!
· Curved Windows
· Corner Windows
· Paired Blinds (Butted Blinds)
· Replacement Vanes