Steve's Blinds

Measuring:

·        Inside Mount: Please provide us with the exact measurements of your window area. Do not take deductions. For looped and Classic Shades, the number and height of each lop/pleat will vary based on the height of the shade. Embellishments at the bottom of the shade will be included in the finished height of the shade (shade plus embellishments will fit within the height of the window). Some light may shine through the embellishments.

·        Outside Mount: Please provide us with the exact measurements of the area you want to cover. The factory makes no allowances on outside mount. Be sure to take window casing into account for complete coverage. For looped and Classic Shades, the number and height of each lop/pleat will vary based on the height of the shade. Embellishments at the bottom of the shade will be added to the finished height of the shade.

Standard Blind Specifications

·               Minimum Width

o       Outside Mount: 16”

o       Inside Mount:16 3/8”

o       Two Blinds on One Headrail: double the minimum width

o       Three Blinds on One Headrail: triple the minimum width

·               Maximum Width:

o       Single Shade: fabric width

o       With Side Mount Brackets: 60”

o       Two Blinds on One Headrail:Double the fabric width (max. 192”)

o       Three Blinds on One Headrail:192”

·               Minimum Height: 18”

·               Maximum Height: 96”

·               Maximum Dimensions for Multiple Blinds on One Headrail: 192” x 96”

Mounting Requirements: Minimum Depth required for Inside Mount

·        Flat Style: ¾”

·        Flat Style Flush Mount: 1 7/8”

·        Looped Style: ¾” – Fabric loops will overhang approximately 2” into the room

·        Looped Style Flush Mount: 1 7/8” – Fabric will overhang approximately 1 ¾” into the room

Continuous Cord Loop System

·        Minimum Width:

o       Outside Mount: 18”

o       Inside Mount: 18 3/8”

o       2 Blinds on One Headrail: Double the minimum width

o       3 Blinds on One Headrail: Triple the minimum width

·        Maximum Width:

o       Single Shade: Fabric width

o       Multiple Blinds on One Headrail Single Control: 120”

o       Multiple Blinds on One Headrail Double Control: 144”

·        Minimum Height: 18”

·        Maximum Height: 96”

·        Maximum Dimensions for Multiple Blinds on One Headrail: 144” x 96”

Mounting Requirements – Minimum Depth Required

o       Inside Mount: ¾”

o       Flush Mount: 2 1/8”

Standard Cord Loop Lengths

Additional Optional Length: 84”, 96”, 108”, 144”, 180

Top Down/Bottom Up

• Minimum Width: 16”
• Maximum Width:
  • Single Shade: 72” (or fabric width if less than 72”)
  • Multiple Shades on One Headrail: 192”
  • Side Mount: 60”
• Height: 18” – 72”

Cut Yardage

·               Minimum Order:1 Yard

·               Due to fabric color variations between dye lots, it is recommended cut yardage be ordered at the same time as the shade

·               Cut yardage is not covered under warranty

General Specifications

Stack Height Chart

Stack Height includes headrail and sill rail. This chart is an approximation of the largest stack possible for all control types at each height range

Bottom Panel Heights

The purpose of the following information is to help you visualize what your shade will look like by approximating the number of full panels and the bottom panel length. Full panel lengths are 9” for flat and 6 1/2” for looped. However, the bottom panel is used as the adjustment panel to get the finished height. Therefore, the bottom panel length varies depending on the shade height. Just a small change in the finished height can create significantly different looks. It is very important to consider the possible variation when ordering more than one shade for a room. For multiple shade orders with shades at exact same height, please add “hang side by side” comment. This chart should be used to compare the effect of various lengths. The information can vary depending on the pleat length tolerance.

Standard Lift System