Steve's Exclusive
Collection
| Save An Extra 40% Off | Sale Ends
Tuesday
@
Midnight |
| Must Mention
or Enter Coupon Code "SB40"
to receive coupon price |
65% Vinyl on Fiberglass & 35% Fiberglass or 69% Vinyl on Fiberglass & 31% Polyester Yams. Sliding Panels provide an excellent window fashion solution for patio doors, sliding doors, as room dividers and for other large window expanses. A floor to ceiling installation provides a dramatic look.
Fabric Width: 96”
Warranty: All of Steve’s Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer’s control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer’s responsibility.
Note: For width specification please know the following
Inside Mount: Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction up to ½”.
Outside Mount: Measure the exact area you wish to cover as the manufacturer will produce your shade to your exact measurements. Be sure to take the window trim into account. As panels do not raise or lower, there will always appear to be at least one panel hanging. If you do not want any portion of your window covered, please take panel width into account.
Panel Track Specifications
Width: 48” – 144”*
Height: 36” – 144”
*All Panels will be 1 ¼” shorter than ordered length as the total height includes the headrail.
*A single panel blind is available.
Dimensions and Mounting Requirements
|
Track |
Height |
Depth |
Minimum Inside Mount |
Minimum Flush Inside Mount |
Minimum Flush Inside Mount w/ Valance |
Minimum Outside Mounting Surface |
|
3 Channel |
5/8” |
2” |
1” |
2 1/8” |
3 1/8” |
2” |
|
4 Channel |
5/8” |
2 ¾” |
1 ¾” |
2 ¾” |
4” |
2” |
|
5 Channel |
5/8” |
3 ½” |
2 ¼” |
3 ½” |
4 ½” |
2” |
Wand Height Chart
|
Panel Height |
Wand Height |
|
48” – 50” |
20” |
|
50 1/8” – 60” |
30” |
|
60 1/8” – 80” |
40” |
|
80 1/8” – 96” |
50” |
Panel Overlap: 3”
Valance Height: 3 ½”
*Valance will be spliced when valance width exceeds width of fabric.
Outside Mount Valance Return Chart
|
Track Type |
Net Return Size |
|
3 Channel |
2 ½” |
|
4 Channel |
3 ¼” |
|
5 Channel |
3 ¾” |
If Ordered w/ Metal Bottom Bar, Hem Pocket Size: 1 ½”
Stacking Chart – Please call us at 1-800-684-0862 for exact panel size
|
One Way Draw |
|
Split Draw |
|
Blind Width |
# of Panels |
Panel Size |
|
Blind Width |
# of Panels |
Panel Size |
|
48” – 53 ¾” |
3 |
18” – 19 7/8” |
|
48” – 54 ½” |
4 |
14 ¼” – 15 7/8” |
|
54” – 59 ¾” |
3 |
20” – 21 7/8” |
|
54 ¾” – 62 ½” |
4 |
16” – 17 7/8” |
|
60” – 65 ¾” |
3 |
22” – 23 7/8” |
|
62 ¾” -70 ½” |
4 |
18” – 19 7/8” |
|
66” – 71 ¾” |
3 |
24” – 25 7/8” |
|
70 ¾” – 78 ½” |
4 |
20” – 21 7/8” |
|
72” – 74 ¾” |
3 |
26” – 27 7/8” |
|
78 ¾” – 86 ½” |
4 |
22” – 23 7/8” |
|
75” – 80 ¾” |
3 |
28” – 29 7/8” |
|
86 ¾” – 94 ½” |
4 |
24” – 25 7/8” |
|
81” – 84” |
3 |
30” – 31” |
|
94 ¾” – 102 ½” |
4 |
26” – 27 7/8” |
|
84 ¼” – 90 ½” |
4 |
23 3/8” – 24 7/8” |
|
102 ¾” – 110 ½” |
4 |
28” – 29 7/8” |
|
90 ¾” – 98 ½” |
4 |
25” – 26 7/8” |
|
110 ¾” – 118 ½” |
4 |
30” – 31 7/8” |
|
98 ¾” – 106 ½” |
4 |
27” – 28 7/8” |
|
118 ¾” – 120” |
4 |
32” – 32 ¼” |
|
106 ¾” – 114 ½” |
4 |
29” – 30 7/8” |
|
120 ¼” – 128 ½” |
5 |
22 ½” – 23 7/8” |
|
114 ¾” – 119 ¾” |
4 |
31” – 32 ¼” |
|
128 ¾” – 140 ½” |
|
24” – 25 7/8” |
|
120” – 127 ½” |
5 |
26 ½” – 27 7/8” |
|
140 ¾” – 144” |
|
26” – 26 ½” |
|
127 ¾” – 137 ½” |
5 |
28” – 29 7/8” |
|
|
|
|
|
137 ¾” – 144” |
5 |
30” – 31 ¼” |
|
|
|
|
All Mounting Hardware Included!
Brackets
- Standard
- Extension Brackets: For outside Mount, Projects back of shade 3 3/8”. For 3 -5 channel tracks only.
Control Options
- Cord Draw: Panels move on a pulley system with a continuous cord loop. This comes standard.
- Wand Draw: Panels move on track by pulling on wand back and forth. The wand is clear plastic.
Stack Options
- One-Way Draw: All panels stack to one side, either left or right.
- SplitDraw: Panels split, with half going to left, and half going to right.
Valance Options
- 3 ½” Insert Valance: The insert fabric matches the shade of the fabric.The valance attached directly to the front of the headrail. Please note that the valance will be spliced when the valance width exceeds the width of the fabric.
Bottom Bar Options
- Aluminum Bottom Bar: Available in white or aluminum finish, with coordinating white or gray end caps.
- Wood Bottom Bar: Has a slim profile.