Steve's Exclusive Sale! Save an Extra 40% Off. Sale Ends Tuesday at Midnight PST. Price on page reflects this discount. Must mention or enter coupon code "SB40" to receive coupon price.Tweed texture and look in neutral colors.
Fabric Width: 74”
Fabric Content: Cotton, Cotton/Linen, Polyester/Linen
Can Fabric be Railroaded*? No
(Railroading is turning the fabric so that shades can have a wider maximum width)
Can Fabric be Seamed*? No
Warranty: All of Steve’s Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer’s control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer’s responsibility.
Note: For width specification please know the following
Inside Mount: Measure from the inside surface to the inside surface. Please provide us with exact measurements as the manufacturer will make the necessary deduction up to ½”.
Outside Mount: Measure the exact area you wish to cover as the manufacturer will produce your shade to your exact measurements. Be sure to take the window trim into account.
Spring Roller Shade Specifications (This is for standard Roller Shade only with no special options, please see specifications for special options, as they may different than the standard shade availability).
Width Availability: 14” – 72”
Height Availability: 36” – 120”
Mounting Requirement:
Flush Mount: 3”
Minimum for Inside Mount: 1 ¼”
Deduction Chart
|
|
1” Metal Roller for Blind Widths
14” – 55 7/8” |
1 3/8” Metal Roller for Blind Widths
56” and Greater |
|
|
Inside Mount |
Outside Mount |
Inside Mount |
Outside Mount |
|
Tip to Tip |
1/8” |
0 |
1/8” |
0 |
|
Barrel |
5/8” |
½” |
5/8” |
½” |
|
Fabric |
1 1/8” |
1” |
1 1/8” |
1” |
Continuous Cord Loop Specifications
Width: 12” – 72”
Height: 36” – 120”
Mounting Requirement:
Flush Mount: 3”
Minimum for Inside Mount: 1 ¼”
Deduction Chart
|
|
1” Metal Roller for Blind Widths
12” – 71 7/8” |
1 3/8” Metal Roller for Blind Widths
72” and Greater |
|
|
Inside Mount |
Outside Mount |
Inside Mount |
Outside Mount |
|
Tip to Tip |
1/8” |
0 |
1/8” |
0 |
|
Barrel |
1 1/8” |
1” |
1 1/8” |
1” |
|
Fabric |
1 1/8” |
1” |
1 1/8” |
1” |
Bottom Bars (available with Continuous Cord Loop Only)
- Rounded Metal Bar – Maximum Width is 127”
- Wood Bar – Maximum Width is 91”
- Rectangle Metal Bar – Maximum Width is 127”
- Fabric-Wrapped Bar – Maximum Width is 127”
Architectural Flat Fascia – Continuous Cord Loop comes standard. Do not choose to have both.
Width Availability: 12” – Fabric Width (if you want a fascia only, the maximum width is 144”)
Height Availability: 36” – 120”
Headrail Dimensions: 2” x 2 7/8”
*Continuous Cord Loop System is standard with this feature an supplied with a plastic bead chain color-coordinated to the fabric
*Fabricated with a 3” or 4” fascia, depending upon the size of the shade and roller size
*Multiple shades with common fascia is available with separate controls
*Multiple shades with one common fascia can be ordered with single control
Mounting Requirements
Minimum Inside Mount Depth: ¼”
Minimum Inside Flush Mount: 2”
Minimum Flat Vertical Surface for Outside Mount: 5/8” x 1 3/8”
Cassette System
Width: 12” – 72”
Height Availability: 36” – 120”
*Cassette system is supplied with matching fabric insert in fascia and color-coordinated bead chain
*This feature is not available with reverse roll option
Mounting Requirement:
Flush Mount: 4”
Minimum for Inside Mount: 1 3/4”
Headrail Dimensions
Height: 2 7/8”
Depth: 3 1/8”
Deduction Chart
|
|
1” Metal Roller for Blind Widths
14” – 55 7/8” |
1 3/8” Metal Roller for Blind Widths
56” and Greater |
|
|
Inside Mount |
Outside Mount |
Inside Mount |
Outside Mount |
|
Tip to Tip |
0” |
0” |
0” |
0” |
|
Barrel |
0” |
1” |
0” |
0” |
|
Fabric |
1 1/8” |
1 1/8” |
1 1/8” |
1 1/8” |
Premium Clutch System
Width Availability: 12” – 72”
Height Availability: 36” – 120”
*Supplied with either 1 ¼” (R8), 1 ½” (R16) or 2” (R24) aluminum tubes depending upon the size of the shade and the weight of the fabric
*Multiple Shades are available with single controls.
Mounting Requirements
|
|
R8 Tube |
R16 Tube |
R24 Tube |
|
Minimum Inside Mounting Depth |
1 1/8” |
2 ¼” |
2 ¼” |
|
Minimum for Flush Mount |
3” |
4 ¼” |
4 ¼” |
|
Outside Mount Minimum Flat Vertical Surface |
5/8” x 1 1/8” |
5/8” x 2 ¼” |
5/8” x 2 ¼” |
Motorization
Width: 12” – 72”
Height: 12” – 96”
All Orders provided with necessary hardware!
Brackets
Standard
Extension Brackets: Projects the back of the shade from the mounting surface up to 2 3/8”
*Please note: Hold Down Brackets are not available with roller shades
Roll Type
· Standard Roll: The roll is visible from the front, and the fabric hangs from the back of the roll.
· Reverse Roll: The roll is not visible from the front of the shade as it is concealed behind the fabric because the fabric hangs from the front.
Spring Roller:A cordless system where the shade can be raised and lowered by hand.
Continuous Cord Loop System:A pulley system where the cord retains the same length no matter what position the shade is in. The clutch roller mechanism is available in 4 colors with plastic bead chain that is color-coordinated to the fabric. This system is supplied with 1” or 1 3/8” roller, depending upon the size of shade and weight of the fabric.
With Continuous Cord Loop system only, the following special options are available:
Bottom Bars
· Rounded Metal Bar: Aluminum bottom bars that are available in 2 colors, silver and white, with coordinating plastic end caps. White bottom bars are supplied with white clutch components and chain while silver bottom bars are supplied with gray clutch component and silver metal bead chain.
· Wood Bar: Wood bottom bars are available in five wood colors. The clutch components and chain will coordinate with the fabric color.
· Rectangular Metal Bar: Available in black or white.
· Fabric-Wrapped Bar: This feature is available with all shade styles. This is a deluxe, fabric-wrapped bottom bar that provides a sleek, non-obtrusive appearance.
Tabbed Hems:Tabbed hems are supplied with one of the multiple accent rods available. Tabs are edged with bias binding front and back. Bias binding is color-coordinated to the shade.
Premium Clutch System:A superior Continuous Cord Clutch System that is available in 3 clutch sizes. Plastic bead chain is color-coordinated to the fabric. The clutch covers are vanilla. Supplied with 1 ¼”, 1 ½”, or 2” aluminum tubes depending upon the size of the shade and the weight of the fabric. Multiple shades are available with a single control with this system.
Cassette System:The cassette system includes a continuous cord loop control system. The cassette system is supplied with matching fabric insert in fascia and color-coordinated bead chain. This feature is not available with the reverse roll option.
Fabric-Wrapped Bar:This feature is available with all shade styles. This is a deluxe, fabric-wrapped bottom bar that provides a sleek, non-obtrusive appearance.
Architectural Flat Fascia:This feature comes with the Continuous Cord Loop System standard and is supplied with plastic bead chain color-coordinated to the fabric, so you do not have to select both with your order. The end cap and brackets are a all-in-one unit. It is fabricated with either a 3” or 4” aluminum fascia depending on the size of the shade and the roller size.
Groover Valance:A plastic groover valance that is supplied with a matching fabric insert to help conceal the roll.
Hem Options
- Standard roller shades are supplied with a straight hem pocket at the bottom of the shade, with a wood slat insert for most fabrics, and a metal slat insert for sunscreen shades.
- Straight Hem with Decorative Braid: The decorative braid options include a gimp, which is color-coordinated to the shade, or a selection of decorative braids.
- Straight Hem with Trim: This feature has a short skirt beneath the hem pocket to allow decorative trims to be applied. There are multiple trim options to choose from.
- Surrey, Tassel, and Twisted Loop fringes are applied to the front of the shade with bias binding on the back.
- Bead and shell fringes are applied on the back of the shade with bias binding on the front of the shade. Bias binding will be color-coordinated to the fabric.
This style is not available with Gimp or Fancy Gimp.
- Scalloped Hems with Trim: All scalloped hems are edged front and back with gimp as standard. Bias binding is available as a no charge option. Both gimp and bias binding are color-coordinated to the fabric.
- Surrey and Tassel fringes are applied to the front with color-coordinated gimp on the back. Blackout fabrics will have white gimp on the back.
- Fancy gimp is applied to the front of the shade with color-coordinated gimp applied to the back.
- Bead and shell fringes are applied on the back of the shade, with bias binding on the front of the shade. Bias binding will be color-coordinated to the fabric..
Motorization
Infrared Control (IR): Operates shades up to 30’ away and requires a ‘line of sight’ from the remote control to the Satellite Eye. Motor is integrated within the metal roller tube. This system is not available with the Flat Fascia System. Optional accessories are available for this system. These optional accessories include 12V Battery Pack (recommended for larger shades) and a 10” Satellite Eye. Please call us at 1-800-684-0862 for pricing and details about these additional accessories.
Radio Frequency Control (RF): Operates shades up to 100’ away in open space, 65’ through walls and does not require ‘line of sight’. Motor is integrated within the metal roller tube. This system offers multi-channel capability to control up to 4 shades or 4 groups of shades individually. This system also offers optional 24 hour timer and wireless wall switch option. Optional accessories are available for this system. These optional accessories include 12V Dual Battery Pack (recommended for larger shades), Multi-Channel Transmitter, Single Channel Wall Switch, Multi Channel Wall Switch, 24 Hour Timer, and 12V Power Supply. Please call us at 1-800-684-0862 for pricing and details about these additional accessories.