Steve's Blinds

Measuring:

·        Inside Mount: Please provide us with the exact measurements of your window area. Do not take deductions. For looped and Classic Shades, the number and height of each lop/pleat will vary based on the height of the shade. Embellishments at the bottom of the shade will be included in the finished height of the shade (shade plus embellishments will fit within the height of the window). Some light may shine through the embellishments.

·        Outside Mount: Please provide us with the exact measurements of the area you want to cover. The factory makes no allowances on outside mount. Be sure to take window casing into account for complete coverage. For looped and Classic Shades, the number and height of each lop/pleat will vary based on the height of the shade. Embellishments at the bottom of the shade will be added to the finished height of the shade.

Standard Blind Specifications

Minimum Width:

·        12” Outside Mount

·        12 3/8” Inside Mount

Maximum Width:

• 114” for single shade*

• 144” for multiple shades on one headrail

*The shade will be paneled in order to make a shade wider than fabric width. The shade will be seamed vertically in three panels (1/4, 1/2, 1/4). The seams may interrupt the fabric pattern. If the height is less than the fabric width, the fabric will be rotated degrees clockwise to avoid the need for panels. This option is only available when the fabric orientation does not change the look of the fabric

Height: 18” – 120”

Mounting Requirements

• Standard and Ceiling Brackets: ¾”
• Extension Brackets: 1”
• Headrail flush with window casing: 2 ¼”

(fabric loops will extend slightly into the room)

Continuous Cord Loop System

Minimum Width:

• 24” Outside Mount
• 24 3/8” Inside Mount
• 48” Multiple Blinds on One Headrail (Min. Panel width is 24”)

Maximum Height

• 115” for single shade*
• 144” for multiple shades on one headrail

*The shade will be paneled in order to make a shade wider than fabric width. The shade will be seamed vertically in three panels (1/4, 1/2, 1/4). The seams may interrupt the fabric pattern. If the height less than the fabric width, the fabric will be rotated degrees clockwise to avoid the need for panels. This option is only available when the fabric orientation does not change the look of the fabric

Height:18” – 120”

Mounting Requirements

• Standard and Ceiling Brackets: ¾”
• Extension Brackets: 1”
• Headrail flush with window casing: 3”

(fabric loops will extend slightly into the room)

Top Down/Bottom Up

Minimum Width:

• 16” Outside Mount
• 16 3/8” Inside Mount

Maximum Width:

• 115” for single shade*
• 144” for multiple shades on one headrail

*The shade will be paneled in order to make a shade wider than fabric width. The shade will be seamed vertically in three panels (1/4, 1/2, 1/4). The seams may interrupt the fabric pattern. If the height is less than the fabric width, the fabric will be rotated degrees clockwise to avoid the need for panels. This option is only available when the fabric orientation does not change the look of the fabric

Mounting Requirements

• Standard and Ceiling Brackets: ¾”
• Extension Brackets: 1”
• Headrail flush with window casing: 2 ¼”

(fabric loops will extend slightly into the room)

Fabric Cut Yardage – Please call for pricing and details

• Fabric Width for Cut Yardage: 57”

• Minimum Order: 1 Yard
• Due to fabric color variations between dye lots, it is recommended cut yardage be ordered at the same time as the shade
• Cut yardage is not covered under warranty

Classic and Seamless Styles: Pleat and Stack Height Chart