Steve's Blinds

Measuring

·        Inside Mount: Please provide us with your exact window measurements. The manufacturer will make the necessary deduction of ½” to the total width of your blind to ensure a proper fit inside of your window. There will be no deduction from the total width of the valance.

·        Outside Mount: Please provide us with the exact measurements of the area you would like to cover. We recommend adding at least 3” to the total width of the window to ensure proper coverage. The manufacturer will make ¼” deduction from the total headrail width, but no deduction from the total slat width. There will be a 1” addition to the total width of your valance.

Headrail Dimensions:

·        Standard: 1.5”W x 2.25”D

·        Cordless: 2” x 2.25”

Minimum Mounting Requirements

·        Inside Mount Min. Depth: ¾”

·        Flush Mount Depth: 2 ½”

Blind Specifications

*Before Factory Deductions

Corded Height: 8” – 120”

Cordless Height: 8” – 84”

Stacking Chart (Approximate and could vary 1”)

Stack is from bottom of headrail to bottom of stacked slats

Ladder and Cord Count Chart

All Mounting Hardware Included!

Brackets

·        Standard: Box Brackets

·        Hold Down Brackets: Prevents blinds from swaying. They can be sill mounted, face mounted or mounted inside the frame. Recommended for doors and windows subject to wind exposure. Must be requested at the time of order.

·        Extension: For installations requiring additional space between the blind and the mounting surface. Recommended when blinds must clear door handles and the like. Must be requested at the time of order.

Valance Options

·        Traditional: 3” Decorative Valance

·        Modern: 3” Valance with less decoration for a more contemporary look

·        Extended Valance: You may specify a valance width greater than the ordered headrail width. Maximum total valance width is 144”. Valances greater than 96” will be spliced. Valances less than 3” greater than the ordered width is free of charge. Valances requested 3” and greater beyond the ordered shade width will include a surcharge. Must be requested at the time of order.

Control Options

·        Wand Tilt Control: Tilt the slats by twisting the wand.

·        Cord Tilt Control:  Tilt the slats by the pulling on the tilt cord.

·        Cordless: There are no lift cords to create a clean appearance and are safe for children and pets. Simply raise and lower your blinds by pushing up and pulling down on the bottomrail.

LightMaster™: The edge rout design eliminates route holes and provides a tighter closure to minimize light for increased privacy and security. Slats can easily be removed for cleaning.

Decorative Tapes

·        ¾” Solid Tapes: Accent your blinds and coordinate with your upholstery and textiles while increasing your privacy. Available in place of standard braided ladders. Choose this tape for a subtle, modern look.

·        1 ½” Solid Tapes: Accent your blinds and coordinate with your upholstery and textiles while increasing your privacy. Available in place of standard braided ladders. Choose this tape for a bolder, traditional look.

·        1 ½” Decorative Tapes: Accent your blinds and coordinate with your upholstery and textiles while increasing your privacy. Available in place of standard braided ladders. Choose this tape for a bolder, traditional look, with a little decoration.

Radius Corners: Slat ends are finished with rounded corners for a softer appearance.

Multiple Blinds on One Headrail: Provides the flexibility of raising one blind while keeping the other lowered on extra wide windows or patio doors. Two or Three blinds on one headrail are available up to a total maximum width of 144”. Minimum innerspace between blinds is ½”. Horizontal slat alignment is not guaranteed.

Other Special Options – Please call 1-800-548-5711 for pricing and details!

·        Cornices

·        Cutouts

·        Multicolor Striping

·        Replacement Valance