Know what you're looking for? Search by Name or Number now:
Know what you're looking for? Search now by Pattern, Book or Keyword:
Enter your Zip code to find aprofessional in your area!
Dist: US Polymers Inc.
Choose the measuring method –There are 2 methods for measuring windows:
1. Window Size Measuring for inside and outside mounts
2. Frame Size Measuring for outside mounts only.
Window Size Measuring
The factory makes all the frame additions and deductions.
Ensure proper mounting clearances.
Frame Size Measuring
The factory makes no additions or deductions to this size.
The width and height of the shutter will include the frames.
For outside mounts only
Louvers come in 2 1/2", 3 1/2" and 4 1/2" widths. The 31/2" is a more traditional design while the 4 1/2" fits well with high ceiling rooms and more contemporary settings.
View louver size
View shutter types.
View frame types.
View frame sides
Shutters can be divided in 1, 2, 3 or more panels to meet your design requirements. Panels fold in any combination of left and right. In the layout shown here you can see the various folding options available. If you do not see the configuration of your choice please call us.
For Sliding panels they are shipped individually. You have the option to attach two panels together with a hinge in the back that comes with every slider order and any 2 panels on the same track can be attached.
View panel configurations.
View divider rail.
Hinges are color matched to your shutters or available in an accent stainless steel or solid brass.
View hinge colors
View tilt rod position.
“Please note that you can either adjust the size of the shutters to the same size or accept that they may not match in louver count or rail size.
You have finished configuring your blinds. Please review pricing on the right side of the page & click the
Add to Cart link to complete.
Choose the measuring method– There are 2 methods for measuring windows:
If you are mounting inside mount and you using a window size measure method:
Measure width & Height in 3 places and record the smallest measurement. The table below shows the deductions the factory will make to the window size.
Note: For inside mounts – Check window to ensure it is square by measuring diagonally. If diagonal differ by up to ½” use a Z frame. ½” to 1” use Trim or Deco Z Frame, if over 1” must mount outside mount.
Clearance – Ensure that there is proper clearance inside of window jamb to accommodate the frame.
The factory will deduct the following (this is just for your information – you do not deduct this)
For Hardwood Core Poly, Grand View & Real Wood
All Z & Elegance Frames
Standard L Frame
If you are mounting Outside mount and you using a window size measure method:
Measure width & Height in 3 places and record the largest measurement. The table below shows the frame additions the factory will make to the window size.
Clearance – Ensure that there is proper clearance on all 4 sides of opening to accommodate the frame.
The factory will add the following (this is just for your information – you do not need to add this)
Hardwood Core Poly & Grand View
Slider Extended Frame
French Door Slimline
When mounting outside mount and you using a frame size measure method:
Measure width & height in 3 places and record the largest size.
Make sure to include the frame additions listed on the table below:
3 Situations that require frame size ordering:
1. Window with Lack of Proper Clearance: Order by frame size whenever there is a lack of proper clearances around window. Our standard factory additions will not work in these situations.
2. Mounting on Molding: Make sure there is a wide and flat area on molding for shutter frame to sit on. The clearance area require on molding is listed on the table below:
Minimum Molding Size for Mounting on Molding
3. Mounting beyond Molding: Measure the edge of molding and add the frame additions listed below. Make sure your size includes a frame overlap beyond molding as indicated in the table below:
1. Outside Mount
Outside mounts are very popular and highly recommended as they do not close up the windows.
There are 3 outside mounting options:
· Mounting on Drywall – The shutter frame is mounted on the wall area surrounding the opening. There must be a flat wall area wide enough to accommodate the frame.
Minimum flat wall area for Mounting on drywall
· Mounting on Molding/Trim – The shutter frame can be mounted on the trim if the trim is flat enough so that the frame can sit on it.
· Mounting Beyond Molding – The shutter frame can also be mounted on the outside of the trim with a frame spacer or an extended frame. Alternatively, the trim can be removed and the shutter mounted in its place.
When mounting outside, makes sure there is enough clearance around the opening for your choice of frame.
Required Clearances around opening for mounting of frame
Hardwood Core Poly
Standard L Frame 2”
Designer Frame 2 ½”
Hang Strip 1 ½”
Slimline Frame 1 ¼”
Wood Basic Colors
Standard L Frame 1 ½”
Designer Frame 2 ¼”
2. For Inside Mounts there must be enough depth for the frame to sit inside of the window jambs.
Z frames are highly recommended for all inside mounts. They eliminate problems associated with out of square windows and the need for caulking. Standard frames and hanging strips should only be used in the case of a window with a molding/trim border around it.
Std L Frm 2”/ Hang Strip 2 ¼”
Z Frm 1 7/8”
Trim Z/Elegance Frm 1 3/8”
Z Frm 1 5/8”
Trim Z Frm 1 1/8”/ Elegance Frm 1 3/8”
Z Frm 1 ¼”
Deco Z/Elegance Frm 1 3/8”
(based on 3 reviews)
of respondents would recommend this to a friend.
Reviewed by 3 customers
Displaying reviews 1-3
Back to top
(4 of 4 customers found this review helpful)
Overall, I'm happy...but next time...
from Las Vegas, Nevada
About Me Midrange Shopper
Comments about Blinds Steve's Exclusive Collection Wood Shutters Wood Shutters Traditional Solid Wood Shutters - Neutrals:
Received the shutters contained in a wooden pallet style crate. The thing was huuuuge and heavy! There was no moving this thing without a forklift. Had to dismantle the crate to get to the shutters, which were well bubble wrapped. Shutter quality was fine and they were easy to put together, once I found out how. No installation instructions, so I reviewed other manufacturers' shutter installation instructions online and chose the one closest to the style I received (Z frame). After I put the first one up, and got it straightened out in the window frame so the doors would operate properly, the rest were a little easier, with the exception of one of them. It seemed it was built for a different window than ordered for. This one I could not get centered and the bottom of one shutter panel still touches the bottom of the frame. My windows have a curved window frame front edge on all four sides. The shutter frames (Z style) I received barely covered the window frames and there were light leaks on the sides of the frames. I expected some, and know you should caulk the frames to correct this, but in my case I wish the frames would have been about a 1/2 inch wider all the way around. The caulking would have been much simpler and the light leaks would have been non-existant. It seemed to me the frames were dimensioned a little too small to begin with. I had about a 1/2 inch of space on all sides between the inner frame of the shutter and the window frame. My measurements were right on when they were provided. The company tells you to send exact measurements and then they make the deductions. It would appear, if they (the manufacturer) did not make as much of a deduction, the shutters would fit a little more snug. I'll know better next time anyway.Overall, they look great and the split (top and bottom) design is great.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
I would buy this product again
By Denise at beach
from Long Beach, CA
About Me Budget Shopper
This shutter is in the kitchen window over the sink. I get compliments from everyone who sees it. I'm able to block the afternoon sun and still get plenty of light. When closed it provides complete privacy.
from Greater Detroit, MI
Most important thing is to be sure you measure correctly, and double, triple check both the measurements and the order. Then the rest is easy, great quality and really good craftsmanship, and the shutters are easy to install, you will just have to request directions, as they are not shipped by the manufacturer, but videos are readily available online... and really it is no problem.
Images shared by David
Great look Real Wood Shutters
Previous: Snow White Ships in 24 hrs. or FREE! Faux Wood Blinds from Steve's Exclusive Collection
Next: Ivory 3.5" Vinyl Verticals Vertical Blinds from Steve's Exclusive Collection
Off White Wood Shutters Wood Shutters from Steve's Exclusive Collection
Coupon price on page reflects this discount.
Sign up for special alerts & promotions
now and receive an instant coupon for
your next order of $175 or more!
Watch for us in your inbox soon!
Use this coupon at checkout
to save $10.00 off your next purchase
of $175 or more!
Click to close
Free Shipping on most Blind OrdersMost blind orders include FREE Ground Shipping to your home or office in the continental United States. Some manufacturers charge an oversized freight charge per order (regardless of the number of blinds) on extra wide blinds because they must use a special delivery company. The width when oversized freight charges apply varies depending on the manufacturer (usually it is around 95 inches or wider) and the charge may be up to $75 per manufacturer per order. M & B, Levolor and Kirsch do not charge oversized freight. Shutters have a freight charge due to the weight of the product. Most blind orders ship within 3 to 5 business days. We do ship to Canada and all other countries. Please call us or send e-mail for applicable charges. Our manufacturers impose a handling fee per order depending on the type of product and order amount that is purchased. For Blind orders, the handling fee is $4.95 per order. You will only be charged one handling fee per order and if ordering blinds and wallpaper together the total handling fee will be determined by the wallpaper order total.
Next Day and 2nd Day AirAll orders can be shipped next day or 2nd day air for an additional charge. Selecting this shipping method does not speed up the manufacturing of your order. It only speeds up the delivery of your order once it leaves the warehouse. Next day and 2nd air day charges on our site are not applicable for Saturday or Sunday delivery. Additional charges will apply If you would like next day or 2nd day air specifically for Saturday or Sunday delivery (please call for price specifically for Saturday or Sunday delivery).
Hawaii, Alaska, Puerto Rico, Canadian and Foreign Country Orders Steve’s Blinds and Wallpaper accepts orders from outside the continental USA including Hawaii, Alaska, Puerto Rico, Canada and foreign country orders. Shipping rates vary depending on the order and the delivery address. To learn the amount of the shipping rate you may place your order and we will contact you with the charges before processing the order, you can also email us at firstname.lastname@example.org or call us toll free at 1-800-684-0862 and one of our representatives will be happy to assist you.
For a limited time buy 3 of any qualifying blind and receive the 4th blind of equal or lesser value absolutely free!
Savings will be automatically reflected in your shopping cart. This offer may not be applied to previous orders. If some or all of the order is returned, the value of the free blind/shade will not be refunded or credited back. Does not apply to commercial orders.
For immediatepricing assistanceplease call1-800-684-0862or email us
Based upon your selection of the
the following options are not available:
These items will be removed from the available
options when you press "Yes". If it is an important
feature to you, select "No" and we will cancel your
Do you want to proceed with your selection?
Show Discontinued Colors
You are currently adding:
Traditional Solid Wood Shutters - Neutrals
You are currently adding a new worksheet