Steve's Blinds

 Measuring:

·               Inside Mount: Please provide us with exact window measurements, as the manufacturer will make the necessary deductions to ensure a proper fit inside of your window.

·               Outside Mount: Please provide us with the exact measurements of the area you want to cover. The manufacturer recommends adding 3” to each side of the shade to ensure light control and privacy. The manufacturer will not make any deductions.

·               Uncovered Window: If you want the entire window completely uncovered when the shade is open, please scroll down to the bottom of the specifications box.

Blind Specifications

Minimum Blind Width

·               One-Way Draw: 22” exact (outside mount)

·               Split Draw: 60” (outside mount)

Maximum Blind Width: 192”

Minimum Blind Height: 20”

Maximum Blind Height:

·               Wand Control: 108”

·               Cord Control: 144”

Headrail Dimensions

Number of Channels:

Panel overlap is always 4”

Wood Cornices:

Cornices wider than the sizes in the chart below will be manufactured in two or three sections. Each section will be shipped in a separate box. The sections must be spliced together during installation:

Fabric Wrapped Cornice

Outside Mount Only: 22” – 117 1/2”

Uncovered Window: When you want to entire window completely uncovered when the shade is open, please follow these instructions:

o       Determine the clear opening width (typically the window width) for one-way draw or split draw. Be sure to add an additional 3” for privacy and light control to the clear opening before determining the finished blind width.

o       Match the clear opening width with dimension found under Clear Opening Column in the table below. For even spacing, round up width measurement to the next size in the chart. Split draw will have even numbers of panels.

o       Order the corresponding dimension found in the finished blind width column in the table below.

One-Way Opening

SplitDraw

Stack = Panel Width + 1/4”

All Mounting Hardware Included!

Brackets

·               Standard Mounting Clip: Used for inside or ceiling mounts, and also used in conjunction with extension brackets.

·               Extension Brackets: Extends the back of the shade away from the mounting surface to clear any obstructions. Available in sizes 2”, 2 5/8”, or 3 1/2”. Standard on outside mount shades and used with a standard mounting clip.

Control Options

·               Wand: Open and close the shade by pulling the wand back and forth, along the window.

·               Cord: Open and close the shade by a continuous cord loop control system where the cord retains the same length, no matter what position the blind is in.

Stack Options

·               One-Way Draw: The panels stack to the side of the window of your choice. The lead panel is the one on the outside. The headrail is not reversible. Panel overlap is always 4”

·               SplitDraw: Panels stack at both sides of the shade and split from the middle. The lead panels are the two center ones. The headrail is not reversible and the panel overlap is always 4”

Valance Options

·               Wood Cornice: Crafted from premium hardwood in five popular finishes. Each cornice is of fine furniture quality and L brackets are provided for easy installation. Inside mount has straight cut ends, and no returns or dust cover are provided. Outside mount have mitered corners, 5” returns and a dustcover to conceal the top of the blind. For outside mount, custom returns can be ordered up to 8”, with a minimum return size of 1/2”. Choose from two different styles (regal or noble: described below) and heights (5 1/2” or 7 1/2”). Wood cornices are shipped separate from the blind but the manufacturer recommends installing the blind and the cornice at the same time.

o       Regal Wood Cornice: Available in stained or painted finishes that crowns your shade with style and sophistication.

o       Noble Wood Cornice: A stately design available in stained or painted finishes. It lends an impressive appearance to larger, wider windows.

·               Fabric-Wrapped Cornice: Available in most fabrics (see table at the bottom of this page). It is not available with the natural shade material panel track. Use to create a coordinated statement with your shade or use a bold, contrasting fabric. L brackets are provided for easy installation. Available as outside mount only, and provided with 6” returns only. Polyester batting under the fabric creates an upholstered appearance and a white fabric liner covers the dust cover and inside of the cornice for a finished look. Cornices will be shipped separate from the blind but the manufacturer recommends installing the shade and cornice at the same time.

·               Roller/Solar/Roman Classic Square Corner Valance: A square-corner PVS, channel panel valance. It include two 5 5/8” returns that can be trimmed to the desired length with scissors. A single valance is available up to 192” in width in which the fabric would not be continuous.

Spliced Blinds: A perfect option for homes or apartments where narrow hallways, elevators, or stairwells make it difficult to move wide blinds. One-way blinds are available up to 192”. The blind operates as one unit after the headrail sections are assembled together. There is a maximum of three headrail sections. For split draw blind, available up to 332”. Split draw blinds over 192” are achieved by pairing two individual one-way blinds together. Each section will operate separately. Panel stack will be to the outside. The maximum number of headrail sections when greater than 192” is 6. Available with wand control only and 4 or 5 channel headrails only. The headrail sections will require assembly at installation.

Mixed Panels: Mix and match fabrics, colors, and textures on one headrail. Any material type can be  mixed together. You must specify the number of panels you want in each material/color. Must specify headrail track color (aluminum or bronze) when ordering. Please call 1-800-684-0862 for pricing and details.

Additional Options: Please call 1-800-684-0862 for pricing and details:

·               Valance only ordering

·               Replacement Headrail ordering

·               Replacement Panel ordering

Fabric Wrapped Cornice Fabrics Available:

·               Bolero (Beechwood, Briarwood, Colt, Hearth)

·               Crackle (Cloud, Ivory, Pure White, Silver, Whisper)

·               Damask (Cocoa, Fawn, Ivy, Tawny)

·               Diamante (Black ‘n Tan, Golden Beige, Gray Sand)

·               Fairmont (Almond, Black, Rice)

·               Galway (Silver Morning, Silver Night)

·               Lanai (Burnt Orange, Chestnut, Seafoam, Straw)

·               Linen (Cream, Natural, Oak, Pecan, Walnut)

·               Manhattan LF (Dark Beige, Leisure Green, Muslin, Off White, White)

·               Manhattan RD (Cabernet, Dark Beige, Green, Muslin, Navy, Off White, White)

·               Manhattan Stripe (Naturals, Ocean, Spring)

·               Mesa (Aloe, Coffee, Ebony, Flax, Taupe)

·               Mist (Bisque, Praline, Rustic)

·               Plume (Basil, Flax, Gray, Russett)

·               Prospect (Alabaster, Black, Chestnut)

·               Quilt (Sage, Silver Glow, Smokey Granite, Smokey Teal)

·               Regatta (Alabaster, Chalk, Fawn, Henna)

·               Retro (Bisque, Morning Mist, Robin’s Egg, Taupe)

·               Romance (Cream, Leaf, Natural, Wheat, White)

·               Satin (Berry, Chocolate, Cream, Natural, True Navy, White)

·               Satin Stripe (Berry, Chocolate, Cream, Natural, True Navy, White)

·               Skylar (Coffee Bean, Haze, Off White)

·               Solarium (Butterscotch, Hickory)

·               Statement (Autumn, Beige, Bone, Sand, Vanilla, Wine)

·               Tropics (Aloe, Caramel, Cream, Linen, Rattan)

·               Vineyard (Off White, Russett, Toffee)

·               Weave (Chestnut, Cobblestone, Opal)