Steve's Blinds

Waverly Blinds and Shades
Bali Weekend Sale!
Subscribe and SaveTwitterFacebookPinterestYouTube

Product listing: 'Coffee Single Cell Room Darkening & Blackout Cellular Shades Cellular Shades from Steve's Exclusive Collection ' to 'True White 1" Slat Mini Blinds from Steve's Exclusive Collection '


Description: The elegant 1/2" single cell makes an ideal choice for covering today's larger, contemporary windows.  Expect quality light diffusion, energy efficiency and UV protection.  Upgrade Options:  DuoFold  Top Down/Bottom Up) - made with two operating cord locks, right cord lowers the middle rail and left cord raises the bottom.   OmniRise - a continuous cord loop, the cord loop is pulled in a circular motion to raise or lower the shade.  Chordless - can be raised or lowered without lift cords with a gentle push or pull on the bottom rail handle.  Day/Night Shade - made from two fabric panels, one between the head rail and center rail, and one between the center rail and bottom rail.  Either panel, or portion of a panel can be used to cover the window.  .

Description: The elegant 1/2" single cell makes an ideal choice for covering today's larger, contemporary windows.  Expect quality light diffusion, energy efficiency and UV protection.  Upgrade Options:  DuoFold  Top Down/Bottom Up) - made with two operating cord locks, right cord lowers the middle rail and left cord raises the bottom.   OmniRise - a continuous cord loop, the cord loop is pulled in a circular motion to raise or lower the shade.  Chordless - can be raised or lowered without lift cords with a gentle push or pull on the bottom rail handle.  Day/Night Shade - made from two fabric panels, one between the head rail and center rail, and one between the center rail and bottom rail.  Either panel, or portion of a panel can be used to cover the window.  .

Description: With its double honeycomb design, it's fabrics insulate your windows against drafts and air leaks. The polyester fabric blocks nearly 100% of UV rays as it changes the glaring sun into gentle light. Upgrade Options: DuoFold Top Down/Bottom Up) - made with two operating cord locks, right cord lowers the middle rail and left cord raises the bottom. OmniRise - a continuous cord loop, the cord loop is pulled in a circular motion to raise or lower the shade. Chordless - can be raised or lowered without lift cords with a gentle push or pull on the bottom rail handle. Day/Night Shade - made from two fabric panels, one between the head rail and center rail, and one between the center rail and bottom rail. Either panel, or portion of a panel can be used to cover the window..

Description: Available in 2 colors. Clean and comfortable look, reduces the harmful effects of ultraviolet rays. Keeps rooms at a comfortable temperature. Non woven 100% polyester fabric that is easy to clean. Easy to install hidden brackets on a strong durable vinyl headrail, color matched heardrail and bottom rail..

Description: Available in 2 colors. Clean and comfortable look, reduces the harmful effects of ultraviolet rays. Keeps rooms at a comfortable temperature. Non woven 100% polyester fabric that is easy to clean. Easy to install hidden brackets on a strong durable vinyl headrail, color matched heardrail and bottom rail..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

SB909 text/html; charset=utf-8

FlashControl

Please specify the MovieUrl property for the location (URL) of the movie to display.

Close Message Pause Message Play Message