X HIDE
SHOW

Steve's Blinds

“Peanuts Levolor Month End Blowout!
Subscribe and Save
Twitter
Facebook
Pinterest
Houzz
Instagram
YouTube

Product listing: 'Angel Food 1" Slat Mini Blinds from Steve's Exclusive Collection ' to 'Pearl 1" Standard Pleat Pleated Shades from Bali Shades & Blinds '


Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Made with .007 Gauge Painted Aluminum These are child safety blinds.  No dangling cords.  The cordless feature operates both the lifting and tilting of the blinds . These blinds come with a built-in color coordinated contoured headrail. There are 7 popular colors to choose from..

Description:  Made with .007 Gauge Painted Aluminum These are child safety blinds.  No dangling cords.  The cordless feature operates both the lifting and tilting of the blinds . These blinds come with a built-in color coordinated contoured headrail. There are 7 popular colors to choose from..

Description:  Made with .007 Gauge Painted Aluminum These are child safety blinds.  No dangling cords.  The cordless feature operates both the lifting and tilting of the blinds . These blinds come with a built-in color coordinated contoured headrail. There are 7 popular colors to choose from..

Description:  Made with .007 Gauge Painted Aluminum These are child safety blinds.  No dangling cords.  The cordless feature operates both the lifting and tilting of the blinds . These blinds come with a built-in color coordinated contoured headrail. There are 7 popular colors to choose from..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 8 gauge aluminum slat for extra durability, also available in 6 gauge a more ecomonical aluminum slat..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 8 gauge aluminum slat for extra durability, also available in 6 gauge a more ecomonical aluminum slat..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 8 gauge aluminum slat for extra durability, also available in 6 gauge a more ecomonical aluminum slat..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 8 gauge aluminum slat for extra durability, also available in 6 gauge a more ecomonical aluminum slat..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 6 gauge aluminum slat, also available in 8 gauge which offers a more durable slat..

Description: This blind features a sleek, rounded front profile headrail with a light blocking lip along the back side. This mini blind never requires a valance and provides a very modern look to a traditional aluminum blind. This is a 8 gauge aluminum slat for extra durability, also available in 6 gauge a more ecomonical aluminum slat..

Description: Neutral shades in a crisp looking semi-opaque fabric that is on both sides of the shade (front and back) for a uniform look.  Available in widths up to 72"..

Description: Neutral shades in a crisp looking semi-opaque fabric that is on both sides of the shade (front and back) for a uniform look.  Available in widths up to 72"..

Description: Neutral shades in a crisp looking semi-opaque fabric that is on both sides of the shade (front and back) for a uniform look.  Available in widths up to 72"..

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 70” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. .

Description: Fabric Width: 72” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. Cleaning Instructions: These were developed for the fabric used in pleated shades. · Remove the pleated shade from the window, open the shade and lay it out on a clean, flat surface, such as a table or countertop. If the shade is dusty, simply vacuum over it using an upholstery attachment. For cleaning fingerprints or soiled spots on pleated shades, Bali recommends using an aerosol spray foam upholstery or fabric cleaner. Spray the foam cleaner over the entire area to be cleaned. Immediately scrub the area with a clean damp sponge until the stains are removed. If necessary, the entire shade may be cleaned in this fashion. Be careful not to crush or wrinkle the fabric. Remove the excess water from the fabric by patting with a clean, dry towel. Hang the shade up when completely dry. Frequent cleaning may tend to remove the fullness and body of the pleated fabric. Due to the differences in ultrasonic cleaning operators, it is not recommended. Do not use strong detergents or spot removers. Dry cleaning is not recommended. Bali’s Warranty Type Of Warranty · Limited Lifetime Warranty for Neat Pleat ® products. · Three year warranty for Standard Pleat products. What is Covered: · Pleated shades are warranted against original defects in materials or workmanship for the time period specified provided that the product was properly installed in a residential home, the product was made or assembled exclusively from Bali materials and components, and Bali’s recommendation were followed with regard to limitations and specifications. Who is Covered: This warranty extends only to you as the original purchaser. Obligations to the Consumer: The obligation of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts. What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installations, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by this warranty. This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. .

Description: Fabric Width: 72” Overlap Available: Yes Liner Available: Yes Cordless Available:Yes Privacy Rating: Semi-Private – Light is screened to varying degrees depending on fabric style and color. Silhouettes of objects and people are visible through the shade. Cleaning Instructions: These were developed for the fabric used in pleated shades. · Remove the pleated shade from the window, open the shade and lay it out on a clean, flat surface, such as a table or countertop. If the shade is dusty, simply vacuum over it using an upholstery attachment. For cleaning fingerprints or soiled spots on pleated shades, Bali recommends using an aerosol spray foam upholstery or fabric cleaner. Spray the foam cleaner over the entire area to be cleaned. Immediately scrub the area with a clean damp sponge until the stains are removed. If necessary, the entire shade may be cleaned in this fashion. Be careful not to crush or wrinkle the fabric. Remove the excess water from the fabric by patting with a clean, dry towel. Hang the shade up when completely dry. Frequent cleaning may tend to remove the fullness and body of the pleated fabric. Due to the differences in ultrasonic cleaning operators, it is not recommended. Do not use strong detergents or spot removers. Dry cleaning is not recommended. Bali’s Warranty Type Of Warranty · Limited Lifetime Warranty for Neat Pleat ® products. · Three year warranty for Standard Pleat products. What is Covered: · Pleated shades are warranted against original defects in materials or workmanship for the time period specified provided that the product was properly installed in a residential home, the product was made or assembled exclusively from Bali materials and components, and Bali’s recommendation were followed with regard to limitations and specifications. Who is Covered: This warranty extends only to you as the original purchaser. Obligations to the Consumer: The obligation of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts. What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installations, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by this warranty. This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. .

SB909 text/html; charset=utf-8

FlashControl

Please specify the MovieUrl property for the location (URL) of the movie to display.

Close Message Pause Message Play Message