Steve's Blinds

Waverly Blinds and Shades
Free Cordless!
Follow Us On Twitter!
Check Us Out On YouTube!
Find Us On Facebook!
Friend Us On Pinterest
Subscribe and Save!

Product listing: 'Umber Woven Wood Material Sliding Panels from Bali ' to 'Cotton Bali Light Filtering 3/8" Double Cell Cellular Shades from Bali '


Description:   Bali sliding panels are perfect for patio doors, wide windows, or as a room divider, as these panels slide along a smooth operating aluminum track. They’re durable and dust-resistant, and the patent-pending panel attachment design reduces light gap between panels and securely holds heavy materials.   Fabric Composition: Slit Bamboo, Bamboo Reed Privacy Level: Light Filtering Color to Streetside: Same front and back   --Coordinates with Bali Woven Wood Shades—   Color Variation: Bali natural shades are created using natural products. By nature, no two strands of grass, bamboo or reeds are exactly the same, making every shade truly unique. Slight color, grain and texture variations should be expected and cherished for their unique beauty. With any type of natural wood product, slight shrinkage, stretching, and warping may occur over time.  Cleaning and Care: Occasional light vacuuming with a brush attachment should keep panels clean. Do not use water or any liquid cleaners.   Tips: During the shipping process, the natural material may have shifted slightly due to its woven construction, causing slight shortening of the panel length or uneven edges. ·               Height: If after installation, panels are slight shorter than ordered, grasp the bottom on the panel and gently pull to stretch the panel to preferred height. Some materials will also stretch by themselves over time. ·               Uneven edges: Lightly tap the panel’s edge with a flat edge, like a ruler, until even. It may be beneficial to stack panels and align edges at the same time.   Pattern Alignment: Due to the pattern design or Roller, Solar, Roman and Natural shade materials, exact alignment of the pattern across panels is not possible.   Bali’s Limited Lifetime Warranty   What is Covered: This sliding panel product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that: ·                The product was properly installed in a residential dwelling ·                The product was made or assembled exclusively from Bali Window Fashions’ materials and components ·                Bali’s recommendations were followed with regard to limitations and specifications   Who is Covered: The warranty extends only to you as the original purchaser of the Sliding Panel blind. Obligations to the Consumer: The obligations of Bali are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.   What the Warranty Does not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurements, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things to be normal wear and tear and are not covered by this warranty.   This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities.   Bali shall have no liability whatsoever for incidental or consequential damages. .

Description: An alternating pattern of one narrow flat slat and three tiny round slats in warm, natural tones, woven with complimentary colored string to create a look that offers a modern alternative to standard window treatments.  Add natural color, texture and dimension to your windows.  .

Description: An alternating pattern of one narrow flat slat and three tiny round slats in warm, natural tones, woven with complimentary colored string to create a look that offers a modern alternative to standard window treatments.  Add natural color, texture and dimension to your windows.  .

Description: Green/brown bamboo, light reeds and umber colored strings.  Standard cord lift features a cordlock, which dependably holds the cord securely in place at any position (wood tassel and lift cords are color-coordinated with shade).  6" valance is standard.  Upgrade Options Include:  Continuous Cord Loop (makes it easier to raise large shades while maintaining a constant cord length), Privacy and Blackout Liners,  Top Down/Bottom Up (allows you to lower the shades from the top or raise them from the bottom in order to maintain privacy or screen an unwanted view while allowing natural light to come in), Decorative Fabric Edge Banding, Valance shapes and trims..

Description: Flat bamboo reeds  and matchsticks woven with color coordinating string.  1 color available..

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

Description:  Cellular shades are best for energy efficiency because they trap air in the cells, keeping the warmth in and the cold air out in the winter. In the summer, they help keep the cool air in, and the heat out. They also absorb sound to make rooms more comfortable.   UV Transmittance: <1%                 UV transmittance measures the effectiveness at preventing ultra violet rays from entering an interior. The percentage ratings indicate the amount of possible UV rays that actually penetrate the window covering into the interior. Shading Coefficient: .25             Shading coefficient measures the heat going through the window when the shade is used versus the heat gain through a bare window. The lower the numbers, the less heat transfer and the cooler the room is in the summer. Sound Absorption: .55-.60             AKA the Noise Reduction Coefficient, sound absorption is the amount of reflected sound absorbed by the shade. The greater the coefficient, the greater the sound absorption. R-Value (Single Pane): 2.1             The R-Value rates the effectiveness of the window covering at preventing energy from flowing to the outside. The higher the number, the more insulative the product. R-Value (Double Pane Est): 3.1             See above for Single Pane Description.   Fabric Width: 90” Privacy Level: Opaque – These fabrics provide more privacy; objects in a lighted room would only appear as vague shapes. Dark fabric colors darken a room more and light colors filter and diffuse bright light. These fabrics are translucent and their colors may be influenced by changing light conditions. Colors may appear to vary depending upon the time of day and type of lighting, as well as whether the shade is partially or fully lowered. Features: Neutral to the streetside .

SB908 text/html; charset=utf-8

FlashControl

Please specify the MovieUrl property for the location (URL) of the movie to display.

Close Message Pause Message Play Message