Steve's Blinds

Waverly Blinds and Shades
 Labor Day Sale!
Follow Us On Twitter!
Check Us Out On YouTube!
Find Us On Facebook!
Friend Us On Pinterest
Subscribe and Save!

Product listing: 'Raw Umber 1" Slat Mini Blinds from Steve's Exclusive Collection ' to 'Sparkle 3/8" Double Cell Cellular Shades from Graber '


Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description:  Each blind comes with 2 Slat Valance standard. All mounting hardware is included.  Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)   Blind Construction: Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top. Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill. Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure. Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats. Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear. Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled. Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components. Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components. Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button. Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.   Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..

Description: Sheer fabric drapes that also serve as effective room-darkening blinds..

Description: Sheer fabric drapes that also serve as effective room-darkening blinds..

Description: Sheer fabric drapes that also serve as effective room-darkening blinds..

Description: Sets a genteel mood in elegant rooms when you desire stylish, yet delicately neutral tones.  Dependable color-coordinated cord is used to raise or lower shade;  safety cord cleat prevents cord from twisting and becoming a hazard.  Sleek compact aluminum headrail offers years of durable, trouble-free operation.  Optional Upgrades:  Continuous Cord Loop (cord never changes length to hold even the largest and heaviest shades securely at any height; tension device prevents cord from twisting), Cordless Lift (provides the safest solution for homes with children and pers, as well as a sleek appearance), Top Down/Bottom Up (lower shade from the top of raise it from the bottom), Top Down/Bottom Up Cordless (shade lowers from top or raises from bottom without the use of exterior cords for both safey and a sleek appearance), Top Down Only (shade lowers from top only), Sun Up/Sun Down (movable center rail separates fabrics and may be positioned at any height with either one or both fabrics showing) and Motorization (raise or lower your shades with a remote). .

SB909 text/html; charset=utf-8

FlashControl

Please specify the MovieUrl property for the location (URL) of the movie to display.

Close Message Pause Message Play Message