Custom Made Vertical Blinds
Description:
Wavy Vertical Stripes
Fabric Content: 68% Polyester/32%Viscose
Fabric Width: 106”
Fabric Care and Maintenance: To clean the shade fabric, dust with a dry cloth, feather duster, or upholstery vacuum attachment. If more substantial cleaning is needed, contact a professional cleaning service.
Bali Warranty Type*: Limited Lifetime Warranty
What is Covered: This Custom Tailored Roman Shade product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:
· The product was properly installed in a residential dwelling
· The product was made or assembled exclusively from Bali Window Fashions materials and components
· Bali Window Fashions’ recommendations were followed with regard to limitations and specifications.
Who Is Covered: This warranty extends only to you as the original purchaser of the Custom Tailored Roman Shade.
Obligations to the Consumer: The obligations of Bali Window Fashions are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things normal wear and tear, and they are not covered by the warranty.
*This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. Bali shall have no liability whatsoever for incidental or consequential damages.
.
|
Description:
Wavy Vertical Stripes
Fabric Content: 68% Polyester/32%Viscose
Fabric Width: 106”
Fabric Care and Maintenance: To clean the shade fabric, dust with a dry cloth, feather duster, or upholstery vacuum attachment. If more substantial cleaning is needed, contact a professional cleaning service.
Bali Warranty Type*: Limited Lifetime Warranty
What is Covered: This Custom Tailored Roman Shade product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:
· The product was properly installed in a residential dwelling
· The product was made or assembled exclusively from Bali Window Fashions materials and components
· Bali Window Fashions’ recommendations were followed with regard to limitations and specifications.
Who Is Covered: This warranty extends only to you as the original purchaser of the Custom Tailored Roman Shade.
Obligations to the Consumer: The obligations of Bali Window Fashions are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things normal wear and tear, and they are not covered by the warranty.
*This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. Bali shall have no liability whatsoever for incidental or consequential damages.
.
|
Description:
Wavy Vertical Stripes
Fabric Content: 68% Polyester/32%Viscose
Fabric Width: 106”
Fabric Care and Maintenance: To clean the shade fabric, dust with a dry cloth, feather duster, or upholstery vacuum attachment. If more substantial cleaning is needed, contact a professional cleaning service.
Bali Warranty Type*: Limited Lifetime Warranty
What is Covered: This Custom Tailored Roman Shade product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:
· The product was properly installed in a residential dwelling
· The product was made or assembled exclusively from Bali Window Fashions materials and components
· Bali Window Fashions’ recommendations were followed with regard to limitations and specifications.
Who Is Covered: This warranty extends only to you as the original purchaser of the Custom Tailored Roman Shade.
Obligations to the Consumer: The obligations of Bali Window Fashions are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things normal wear and tear, and they are not covered by the warranty.
*This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. Bali shall have no liability whatsoever for incidental or consequential damages.
.
|
Description:
Wavy Vertical Stripes
Fabric Content: 68% Polyester/32%Viscose
Fabric Width: 106”
Fabric Care and Maintenance: To clean the shade fabric, dust with a dry cloth, feather duster, or upholstery vacuum attachment. If more substantial cleaning is needed, contact a professional cleaning service.
Bali Warranty Type*: Limited Lifetime Warranty
What is Covered: This Custom Tailored Roman Shade product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:
· The product was properly installed in a residential dwelling
· The product was made or assembled exclusively from Bali Window Fashions materials and components
· Bali Window Fashions’ recommendations were followed with regard to limitations and specifications.
Who Is Covered: This warranty extends only to you as the original purchaser of the Custom Tailored Roman Shade.
Obligations to the Consumer: The obligations of Bali Window Fashions are limited to the repair or replacement of parts or product found to be defective. Bali is not responsible for shipping costs or labor costs for measuring and taking the shade down or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover: This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installation, cleaning or maintenance. In addition, normal wear and tear are not covered by the warranty. All fabrics can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Bali considers these things normal wear and tear, and they are not covered by the warranty.
*This warranty is exclusive and in lieu of all other written or oral warranties or obligations and liabilities. No person is authorized to extend or alter this warranty. Bali shall have no liability whatsoever for incidental or consequential damages.
.
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
Description:
Each blind comes with 2 Slat Valance standard. All mounting hardware is included.
Made with .006 Gauge Painted Aluminum with the exception of colors Brushed Aluminum (these two colors have an actual brushed finish)
Blind Construction:
Headrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed into a 1.5” x 1” U-shape profile with rolled edges at top.
Bottomrail: Cold rolled steel, bonderized, corrosion resistant, finish painted, bakecoated and formed after painting into ¾” width. Bottomrail End Caps are soft molded plastic formed to fit over the ends of the bottomrail, available with pin and hold down brackets to secure bottomrail to jamb or sill.
Slats: Manufacturered from magnesium alloy AIMg 3.5, which is a chemical composition, 1” wide. Highly corrosive resistant. The material is functional in different environments without oxidating. They are tested for color stability, and the baked enamel finish can withstand 500 hours at 100% humidity; 300 hours in a 5% salt spray solution at 85 degrees, and 250 hours in accelerated weather without blistering, corroding, or adhesive failure.
Tilter: The tilter mechanism is a worm and gear type, of heavy-duty non-absorbing plastic, resistant to heat and water, to maintain slats at any angle. The tilter housing is of a special heavy-duty plastic to provide long lasting maintenance free operation. The protruding worm attached directly to a tubular wand. 5:1 ration ensures case of opening/closing slats.
Wand: A clear co-polyester rod, hexagonal for positive grip, with a metal hook at one end, which attaches the wand to the tilter gear.
Cord Lock: A housing of durable plastic containing metal rollers over which the cords ride. The floating knurled brass rollers are designed to lock the cord at any length. A metal cord separator guide prevents the cords from becoming entangled.
Tilt Rod: Made of cold rolled steel with corrosion-resistant finish and shaped to fit corresponding openings in tape roll and tilter components.
Braided Ladder: Made of high-density polyester yard in a ladder formation with vertical components.
Lift Cords: Made of braided polyester. The cord is secured to the bottomrail by means of a tape lock button.
Installation Brackets: Snap-in brackets of .042” cold rolled steel, bonderized and treated to resist corrosion, with a bake-on finish paint coat to match headrail color. For blinds over 60” wide, center support brackets are provided, to be spaced evenly with maximum spacing 36”.
Warranty: All of Steve's Exclusive Collection Products are backed with a limited lifetime warranty which does not cover normal wear and tear, improper installation, abuse, or other items outside of the manufacturer's control. Freight and packaging to and from the manufacturer is not covered under the warranty and is the customer's responsibility..
|
|